Sugihara

I don't run it with both on just wanted to show them off for the pic.Weedeaterman would sure know on that bar though.

 

Those are good looking bars.

 

My one and only SugiHara... hard to believe that I won it on eBay for only $71! Nobody else even bid on it.

 

Someone say Sugihara?

 

Mmmmmm.... Sugihara..... must have

 

There's a guy near State College PA selling a 2011 390xp for $400. Not ported, but easily resolved at that price

 

I thought I would show the size differences in the sugihara bars Bothsame mount and are 18" one is 3/8 other is .325
The 3/8 total length is is just under 21 3/4 and is 1 "3/8 longer than the other

 

18" looks like the large mount profile with the tail narrowed to the K095 mount.

 

Cool... I've been using a 346 as a firewood saw since 2001. Limb with it too...

 

You've been spoiled for a long time

 

This photo is 4 years old, both bars have seen a lot of use and are still good as new.

 

Yes, I usually don't want to use any other saw...

 

550xp might change y'all mind

 

I have that same problem can't keep my hands off it.

Maybe a 2153 would help but not the 550 C'mon MAN

 

I've run a 550 a little, good saw, but like my 346's mo better.

 

Lighter, quicker, better balance and fuel effiency. What's not to like.

Even though I sold my 550xp and kept 346xp and 2153.

Edit: better anti vibe also.

 

Stock I might prefer a 550 (what's a stock saw), but a ported 346 will kick a ported 550 into the ditch. The weight is only 4oz difference bw the two and I can't tell any difference in the vibes.

 

I love the way a 550 545 handles and feels in the hands compared to a 346. I would take a 545 over a 346 let alone the 550 over it. 346 feels so crappy in the hands in the cut once you put time on both IMO.

Ported yes a 346 if your into cookie cutting and times etc. Then again if you dont have a 357 carb on your 346 you left another 10% on the table.

Stock for stock which 99% of the world out there uses. 545 550 hands down.