*** EVERYTHING OTHER THAN TANK HOUSING ASSEMBLY IS SPF *** I have a basket case late model 066 I’m parting out. It looks to me to be pretty much complete, but the top end and case halves are toast. I’ve attached some photos below as well as a list of the more desirable parts with applicable notes & prices (PM for detailed photos). I didn’t want to price every part on the saw, so if you’re interested in anything not listed send me a PM including your zip code and I’ll give you a price shipped as well as photos. Tank housing. Has carb housing attached and all throttle components. It’s in very good condition and appears to have been replaced shortly before saw was disassembled. Has the most recent style vent. $75 + shipping Plastics, round top (top shroud has a small crack near the rear mounting hole). $15 top / $10 filter cover + shipping Poly flywheel - $20 + shipping (have one potential claim) Coil (tested to have spark). $25 SHIPPED (have a first & second potential claim) Starter assembly, later rounded style. Good physical condition, but is missing some paint and will need a new cord assembly. $30 + shipping Brake handle / hand guard (very good condition). $10 + shipping WJ-69 carburetor. $40 SHIPPED (have a first & second potential claim) Muffler, non-DP (top corner is bent back – could be straightened). $16 SHIPPED (have one potential claim) ½ wrap handlebar (very good condition). $35 + shipping (have one potential claim) HD air filter with prefilter. $20 SHIPPED Oil pump & worm gear. $25 SHIPPED (have one potential claim) Just to be clear… I only listed the ‘heavy hitters’ above, but I nearly every part, so please ask if you need something. The piston is scored. The cylinder is scored & missing plating above and below the exhaust port. I consider both case halves to be shot due to various stripped screw holes and other issues. The clutch cover is usable, but has some damage on the inside so I didn’t list it above. Payment via PayPal gift option (or add 3%). I’m not really interested in trading because that’s how I got this saw and I’d like to break the cycle. The only trades I might consider would be for Stihl 1106 series parts (070/090). Thanks!
Bearings are smooth and don't have play, but the crank/con-rod has some rust from sitting 'topless' for awhile. If a guy wanted to split it and pull everything out it could likely be cleaned up. I could get photos if interested.
If you don't mind, I'd like to see those pics. I'm still deciding what I should do with this 066 I have. Saw in a box.
Carb, coil, flywheel, 1/2 wrap, pump/worm, and muffler are sold. An offer is being entertained for the remainder of the lot, but if that falls through I'll further update the parts available.
Everything other than tank housing assembly is sold pending funds. Except the crank MasterMech . . . that's all yours if you want it.
