I see you did the same thing I am guilty of. Start filling it with wood before its finished. Great use of leftovers. Just don't hit your head. Needs a low clearance sign if I'm there! I don't even have a roof on my shed addition...its several sheets of plywood, OSB etc.
The roof on this thing ended up being a big mismatch of whatever sheets I had. Some 3/4 marine plywood, some 1/2 OSB, 1/2 plywood, and one piece of 7/16 to finish it off. Not too different from your “calico” roof metal that I remember seeing. It’s crude but will work though, and it only cost me some time. All the materials were already here and some recycled from the big shed that got squashed last winter. I had gotten the bulk of the framing done yesterday and wanted to see some wood in it right away, hence the “tryout for size” before finishing it.
As long as it keeps the wood dry! How is the UV resistance of that plastic sheeting you scrounged? My original shed is done, but the two additions don't have a "permanent" roof...yet.
I originally thought it was crap based on one place I used it. After a year it was Swiss cheese. But in another spot where I used it, it held up fine. I looked up above the stacks and made an observation. Where the tarp rotted there was an oak tree above it. In the place where the tarp was fine, there was a maple. So there’s something about the rain runoff from the oak… acidic maybe. Oak is high in tannins so maybe that’s it too. So in a nutshell, the free tarps work… kind of. I have enough of them so I’ll use them.
This takes care of all the wood that was already split and needing to be stacked. I have more red oak in rounds that I’ll have to split, then this shed will be full.
Never refilled after last year's heating season. That's a stack of elm rounds. I suspect I'll end up noodling them.
Sans hydraulics, the chainsaw is the correct tool for that job I think you’ll be happy enough with the end product when it comes time to burn it though.
Love the rectangular splits in your cribbed ends. Good looking firewood and stacking. When I used a sledge and wedge on the big ones, before hydro, I would always split a bunch of rectangles for cribbing on the end stacks!