In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Bottom Rows

Discussion in 'The Wood Pile' started by FortySix&Two, Nov 13, 2026 at 4:28 PM.

  1. Michigander

    Michigander

    Joined:
    Jan 13, 2026
    Messages:
    90
    Likes Received:
    776
    Location:
    Macomb Michigan
    That is a beautiful stack of wood. How high is it?
     
  2. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,592
    Likes Received:
    33,113
    Location:
    Over here
    No bottom row issues for me with a single layer skid. My tarps usually give me a little bit of awning on either side.
     
    eatonpcat and theburtman like this.
  3. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    18,995
    Likes Received:
    122,694
    Location:
    Gettysburg, PA
    The double wide splits go up about 6’, then on top in the middle I go about another 12-18”.
     
  4. Scotty Overkill

    Scotty Overkill Administrator

    Joined:
    Oct 1, 2013
    Messages:
    9,803
    Likes Received:
    66,573
    Location:
    Central PA
    A little splash ain't gonna cause you issues so long as the wood is off the ground and has air flow. I'm almost 7yrs ahead on my stacks, now mind you that wood sits in the stacks for 5 to 7 YEARS.....so even though I have everything off the ground and top-covered, some of my outer perimeter wood does get a little mushroom growth on the weather side (namely on the sapwood band, if at all) but that's literally it. Nothing inside the stacks is affected so long as the top cover isn't leaking (I use EDPM rubber roofing so it does very well at keeping the water out for many years).
     
    eatonpcat, Baggs, Erik B and 4 others like this.
  5. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,207
    Likes Received:
    218,030
    Location:
    North Haven, Connecticut
    Those cages are nice if you have the room and even equipment to move them. I've made similar sized bins out of pallets in the past mostly for nuggets and chunks.
     
    eatonpcat and theburtman like this.