In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Road rebuild

Discussion in 'Everything Else (off topic)' started by MikeInMa, Apr 11, 2026.

  1. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    16,031
    Likes Received:
    116,382
    Location:
    Southern Worcester county
    Perhaps, "that'll do".... for now.

    I had the same thought. They do mix up concrete as they go.

    That's pretty much where the stone wall was located.
     
  2. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    25,353
    Likes Received:
    165,138
    Location:
    NE Ohio
    You are correct...10 years from now (or less) you'd be able to grab that casting and walk off with it...I see it all the time.
    If the guy attempted to "do better", then there is a ring or two of Con-Seal under there...not so much because that drain grate needs sealed (but that would be important on a sanitary manhole casting) but more to help "glue" it down.
     
  3. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,251
    Likes Received:
    218,370
    Location:
    North Haven, Connecticut
    Id have to agree. Looks like extra concrete mix. Thinking the road bed of crushed stone will be level with the top and asphalt put over it. Just a guess on my part.
     
  4. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,230
    Location:
    Over here
    I don't see them unstacking that to mortar the joints. Understand that material will be compacted around...seems jointing the blocks would be more durable...but what do I know...I am not a drainage engineer by any means (or a brickie). lol
     
  5. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    16,031
    Likes Received:
    116,382
    Location:
    Southern Worcester county
    Here's the see-ment truck they use
    IMG_20260930_125430.jpg
     
  6. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,230
    Location:
    Over here
    NGL...that's pretty slick.
     
  7. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,251
    Likes Received:
    218,370
    Location:
    North Haven, Connecticut
    Calling jo191145 He's the see ment expert here.

    I see sand so they are making there own mix whether mortar or concrete.
     
    RCBS, T.Jeff Veal and brenndatomu like this.
  8. eatonpcat

    eatonpcat

    Joined:
    Oct 5, 2013
    Messages:
    10,393
    Likes Received:
    59,421
    Location:
    Eaton Township, OH
    Agree
     
    RCBS, T.Jeff Veal, MikeInMa and 2 others like this.
  9. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    16,031
    Likes Received:
    116,382
    Location:
    Southern Worcester county
    No real activity in front of us lately.

    There's still digging and trenching just east of us, continuing with drainage efforts.



    IMG_20261014_075220.jpg

    IMG_20261014_075536.jpg

    You can see our flag and toolshed in the distance over the line of sight across the pipes
     
  10. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    16,031
    Likes Received:
    116,382
    Location:
    Southern Worcester county
    Well, our turn to be inconvenienced again.
    Drainage going in, including across the driveway. Should be OK in an hour. We have errands to run.

    Cutting the driveway with a saw, see.
    IMG_20261103_074314.jpg

    IMG_20261103_074447.jpg

    Thin bucket for a trench
    IMG_20261103_074634.jpg

    IMG_20261103_080605.jpg

    IMG_20261103_081735.jpg
     
  11. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,251
    Likes Received:
    218,370
    Location:
    North Haven, Connecticut
  12. huskihl

    huskihl

    Joined:
    Jan 30, 2016
    Messages:
    3,728
    Likes Received:
    21,489
    Location:
    Michigan
    No, I have not
     
  13. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    25,353
    Likes Received:
    165,138
    Location:
    NE Ohio
    Aww, comeon...not even your own?!
     
  14. huskihl

    huskihl

    Joined:
    Jan 30, 2016
    Messages:
    3,728
    Likes Received:
    21,489
    Location:
    Michigan
    Nope. Most of them have 10k rpm limited coils. Porting would make them hammer on the limiter nonstop
     
  15. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,230
    Location:
    Over here
    I've seen video of a string trimmer done up. Never yet seen hedge trimmers or backpack blowers.
     
  16. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    16,031
    Likes Received:
    116,382
    Location:
    Southern Worcester county
    Gee.... one goes away for a few days and returns to a "retention pond" where there was once a dirt berm.

    Across the state highway-

    IMG_20261110_131935.jpg

    IMG_20261109_131654.jpg

    IMG_20261109_131723.jpg

    IMG_20261110_141638.jpg

    Looks to be finished. Ready for hydroseeding. Maybe.
     
  17. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,230
    Location:
    Over here
    And now you'll have a guardrail over there so's the motorists don't end up in the pond. (they might find a way anyways)
     
  18. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,752
    Likes Received:
    69,598
    Location:
    Bristol, Connecticut
    I love seeing civil engineering projects like this come together. With the topsoil spread, it does look like they do have some kind of half baked plan in the works. I hope the state workers maintain it well long term so it doesn't become a seed bank for all things invasive.
    That retention pond is going to need a rubber ducky or six :whistle:
     
  19. Erik B

    Erik B

    Joined:
    May 12, 2015
    Messages:
    5,704
    Likes Received:
    39,486
    Location:
    Western Wisconsin
    If it retains too much, it may become a breeding spot for mosquitoes. :hair::hair::bug:
     
  20. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    16,031
    Likes Received:
    116,382
    Location:
    Southern Worcester county
    Already discussed that with some friends.

    :rofl: :lol: