In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Perfect Sycamore

Discussion in 'The Wood Pile' started by Chud, Oct 31, 2026 at 3:43 PM.

  1. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    7,316
    Likes Received:
    54,583
    Location:
    NC
    This was my first experience with Sycamore and I say gimme more. It split like pulp wood. I’ve had Pine put up more resistance than this Sycamore. It made a lot of nice splits in a short amount of time. The scaly bark section of the trunk took a little more pressure but still not bad. This was a yard tree and I processed it less than a month after being cut. I don’t know if that was the difference maker or not because this is the first. I didn’t experience anything outside of straight grain. Every knot defect split open easily. I was thinking maybe the scaly bark lower portion of the trunk would be difficult but the difference was minimal. Maybe NC has superior Sycamore or vertical splitting is superior and not gay like horizontal. :rofl: :lol:
    IMG_6082.jpeg
    ​
     
    brenndatomu, Ron T, SimonHS and 15 others like this.
  2. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,672
    Likes Received:
    68,909
    Location:
    Bristol, Connecticut
    Better get yourself a lotto ticket :) I got some once in spring 2024. Mine was a little gnarlier but still better than black gum or live American elm. I burned it this past winter and enjoyed it for the little time it spent in my stove before going to ash. I'd take it again in small quantities.

    [​IMG]
     
  3. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    7,316
    Likes Received:
    54,583
    Location:
    NC
    It definitely feels and splits like a BTU lightweight. The Bald Cypress I split a few years ago dried to the weight of a paper towel roll center tube.
     
    RCBS, brenndatomu, Screwloose and 7 others like this.
  4. NC-PersimmonDude

    NC-PersimmonDude

    Joined:
    Oct 15, 2026
    Messages:
    17
    Likes Received:
    134
    Location:
    NC
    maybe it being a solo yard tree affected things, perhaps Good sun lessened the twists and interlocking grain. I tangled with half a cord of shady searching for sun twisted sycamore few years ago and it was tough splitting. Even ten inch stubs were making the monster maul work overtime. I then looked it up and learned the wood is often used in butcher blocks
     
  5. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    49,176
    Likes Received:
    313,886
    Location:
    Central MI
    Oh boy. Some may get upset. :rofl: :lol:

    It's been many, many moons since I've split ant sycamore and then I never did much. I do not remember it splitting clean like yours. Perhaps those trees grow a bit different down there? I say good for you.
     
  6. JDU

    JDU

    Joined:
    Apr 29, 2016
    Messages:
    671
    Likes Received:
    5,681
    Location:
    Perry County, PA
    Never split Sycamore rounds, only experience is with 1" thick boards from pallet mill scraps.....never went well. Don't even try anymore with them.
     
  7. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,084
    Likes Received:
    217,252
    Location:
    North Haven, Connecticut
    Glad that it went well and I'd say you lucked out. Ill take a piece or two and generally avoid it like the plague.
     
  8. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    7,316
    Likes Received:
    54,583
    Location:
    NC
    I’ve still got this beauty left to process
    IMG_6084.jpeg
     
  9. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,084
    Likes Received:
    217,252
    Location:
    North Haven, Connecticut
    Is that trunk or limb (the bigger log)? About as big as ill take even then its a spur of the moment decision.
    July last year my last time with only a couple small logs. Thinking I'll say no next time!
    [​IMG]
     
  10. Locust Post

    Locust Post

    Joined:
    Oct 4, 2013
    Messages:
    8,963
    Likes Received:
    52,600
    Location:
    N. E. OH
    I've said before, my experience with sycamore was good, both splitting and burning.
     
  11. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    7,316
    Likes Received:
    54,583
    Location:
    NC
    I’ve split the lower trunk and another log similar to the one in the pic. I’d say it’s another section of upper trunk. I split some big White Oak limbs today that were one battle after another with all the V’s and fused stems. Ffs I can’t wait to do some more Sycamore after the wo.
     
  12. JD Guy

    JD Guy

    Joined:
    May 11, 2022
    Messages:
    1,336
    Likes Received:
    8,297
    Location:
    Upstate SC
    That looks as bad as sweetgum if that’s even possible :faint:
     
  13. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,521
    Likes Received:
    32,719
    Location:
    Over here
    To me it stinks like cottonwood when burned. I only know this from burning it in brush piles.
     
    eatonpcat, brenndatomu, Chud and 2 others like this.