In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Basement Heating Options

Discussion in 'Everything Else (off topic)' started by VTAbstoluteSteel, Sep 20, 2025 at 10:15 AM.

  1. VTAbstoluteSteel

    VTAbstoluteSteel

    Joined:
    Jun 12, 2021
    Messages:
    35
    Likes Received:
    192
    Location:
    Orange County, VT
    Not sure where to put this because it involves multiple types of heat, so mods please move if necessary.

    Greetings!

    I am in the process of planning to finish part of our basement it will be about 600 sf, 48 x 13, fully underground. Looking for it to be a family room/ teen hangout. There is currently no heat down there. We had oil heat but I removed the tank/furnace and rely on the mini splits up stairs + wood heat. Because we had the oil heat, I do have access to a flue. I am back and forth about a few options:

    1) We have a smaller 8k BTU mini split in a room that we put a wall in the middle. We almost never use it so I was thinking about relocating it to the basement, cost would probably be around $1500 labor + materials as the run length will be much longer than it is currently. Pros: It would work on a thermostat, low operating costs. Cons Mini split is older but hardly ever used.

    2) Use the existing flue for a wood stove. The only small wood stove I am familiar with is the Woodstock Survival hybrid which is not cheap at $2k plus a SS liner I am probably looking at $4k with install. Pros: I have enough wood. Cons: More expensive, not sure I want to maintain two stoves, might limit the usage. Does anyone know of a good quality cheaper stove that would work? Since we are there not as long during the day, I am thinking a non-CAT stove might be a better choice? Quick hot heat for a few hours then let it be cold when not using. Since it is a basement, it will retain it better anyways.

    3) Use the existing flue for a pellet stove. Probably $1k for the stove and $1k for the liner. It might be a mental thing but I would be more comfortable to DIY a pellet liner than a wood stove. Pros: Cheaper than the wood stove, has a thermostat. Cons: dealing with pellets + wood, pellet stove have more moving pars/maintenance. Does anyone have any pellet stove suggestions for 600 sf?

    I am not interested in introducing propane to house, no natural gas exists, and I think electric baseboard though quick an easy install would cost me a fortune in cost to run them.

    Any comments, suggestions would be much appreciated!

    Thanks

    -Chris
     
  2. Erik B

    Erik B

    Joined:
    May 12, 2015
    Messages:
    5,348
    Likes Received:
    36,368
    Location:
    Western Wisconsin
    If you did change your mind about propane, you may want to look at a Jotul. I have one in the basement in our family room and it does a nice job of heating the basement and even has heat flowing up the stairs. The flue runs through the basement wall.
    DSC01523.JPG DSC01524.JPG
     
  3. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,316
    Likes Received:
    53,238
    Location:
    SE Mass
    Drolet makes a 1.5 (or so) small woodstove that might be a nice fit. iirc, they have 4 models based on the same firebox. I was looking at the deco nano a while back. Supposedly just 5 hour burn time but that may be a rather conservative estimate.

    I would have kept the oil heat, but that's me.
     
  4. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    23,059
    Likes Received:
    147,383
    Location:
    NE Ohio
    X2, Drolet makes some great budget friendly stoves...this is basically their company store...free shipping too.
    MFP - The Online Stove and Fireplace Store
     
  5. VTAbstoluteSteel

    VTAbstoluteSteel

    Joined:
    Jun 12, 2021
    Messages:
    35
    Likes Received:
    192
    Location:
    Orange County, VT
    Thanks for the recommendation, I will check it out!

    I would have kept the oil too, I like oil much more than LP. But we had a two tank setup from probably the mid 1990s that was very pitted and rusty. The previous owners cut in a perimeter drain around the basement into a sump pump which would have made my back yard a superfund site if the tanks leaked, I was especially worried during the fill since the first tank takes on a lot pressure. The oil furnace was forced hot air and working fine but it was about the same age and a new oil tank didn't seem worth the investment.
     
  6. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    28,381
    Likes Received:
    160,070
    Location:
    SE Wisconsin
    My parents had the same jotul in their cottage up north. It was pretty slick. Use the remote to turn it on and the blower works well.
     
    Erik B, eatonpcat, metalcuttr and 3 others like this.
  7. Gardening/Arborist

    Gardening/Arborist

    Joined:
    Jan 31, 2014
    Messages:
    9
    Likes Received:
    52
    I think I'd get a third mini split.

    The one you have that is not used much is kind of serving as a back up already.
     
  8. bogieb

    bogieb

    Joined:
    Mar 30, 2015
    Messages:
    12,140
    Likes Received:
    73,534
    Location:
    New Hampshire
    I'm not a fan of the cheaper pellet stoves like you find at HD or hardware stores. They tend to not have ash pans (so you have to clean out the firebox more often), small hoppers, and not be as reliable as better stoves. But for occasional use, a cheaper pellet stove would probably be fine. A "good" stove for constant use would cost more than a wood stove.

    Since that is a finished area, you only need a small pellet stove to keep it warm. Anything around 23k btu capability should be fine. But at the same time it is easier to throttle back a bigger stove than get more heat out of a smaller stove than it is capable of, and the stove will do so automatically. So, I wouldn't be afraid to go up to either a 38k or 48k btu pellet stove.

    Do you have inside storage that you are willing to give up to keep pellets in? Do you have a place close by to get pellets from that are reasonably priced?

    You may be doing better to go with a small woodstove since you already use wood. The only consideration would be that a small wood stove may use shorter lengths.
     
    Horkn, eatonpcat, metalcuttr and 3 others like this.
  9. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,413
    Likes Received:
    291,563
    Location:
    Central MI
    One big thing to keep in mind is that getting the wood into the basement and disposing the ashes can get troublesome rather quickly, especially the carrying wood down the stairs. This is perhaps the biggest problem with a wood heater in the basement.

    On that note, I have heard some great things about the Woodstock gas stoves. They are small but I believe would heat the basement quite well.

    Another thing to keep in mind is that cement or block basement walls will absorb most of the heat unless they are covered and insulated well.

    Good luck.
     
    bogieb, Horkn, Eric VW and 5 others like this.
  10. BHags

    BHags

    Joined:
    Jan 31, 2016
    Messages:
    632
    Likes Received:
    3,211
    Location:
    Massachusetts
    The older I get the more I like our mini splits.
     
    MikeInMa, Horkn, Eric VW and 2 others like this.
  11. Erik B

    Erik B

    Joined:
    May 12, 2015
    Messages:
    5,348
    Likes Received:
    36,368
    Location:
    Western Wisconsin
    That stove has a thermostat powered by the pilot light on the stove. Blower does work well.
     
  12. bogieb

    bogieb

    Joined:
    Mar 30, 2015
    Messages:
    12,140
    Likes Received:
    73,534
    Location:
    New Hampshire
    Right there is a big consideration. I made the assumption the basement would be finished. If it isn't finished, or at least the walls insulated and the concrete floor covered, you will need a larger pellet stove and it will eat thru pellets. I have P61a in the 650 sq/ft basement for a reason - when it was put down there it was cinder blocks and concrete floor, It was also supposed to heat upstairs (which it would have if I had better air convection).

    After several years, I used rigid foam board to insulate the cinder blocks, and put in a raised floor system, and now the P61a is overkill. I do have one wall that abuts the under house garage (unconditioned), so it is insulated with regular R13 batts. I could easily do with a P43 to keep the basement at 68*. But, there are also times that I have to heat the garage (FHW pipes run thru it), so the P61a is fabulous for taking care of that a few weeks a year.