Whoops...

As Warner said let the season begin

 

That's one way to slow it down...lol

 

At least they keep us in plenty of work.

 

Wonder if the truck driver drove over a high curb and when wheels bounced onto the ground the hitch hit the curb smashing it up. ????

 

To be honest I really haven’t given it much thought. The hitch is mounted on the back of a truck like this. When the barricade is folded down like this the hitch is pretty exposed. They are not supposed to drive around with it down but they do so it could have caught on anything.

 

I have said before that some of my customers could break a anvil with a rubber mallet !! This is the attachment plate from a mini skid steer brought in yesterday cast steel 3/4 to 1 inch thick !! I am never amazed anymore sometimes I am impressed with the carnage though JB

 

He said he hit a bump and this happened.

 

Just did a repair for a customer similar problem . His was rust caused on .093 steel tube. Had to replace the tongue and a cross member ( which was pretty much not existant due to rust) 4x8 tilt trailer. sorry no pics, never entered my mind,

 

If a bump caused that, it must have been being held together that safety sticker!

 

Boy, they have really cheapened those light trees up the last 15-20 years! Used to be a lil steel in 'em! (and a lil diesel generator that would run darn near forever, with even the least of care!)

 

Yup, still have the diesel engine and pancake generator. And yup just like everything else they have been cheaped out on!

 

Just have them do the same thing again going the other direction.

 

Have to say...that stabilizer looks to be extremely underspec'd. Should at least be boxed.

 

That was the exact thing that came to mind for me as well.
Hard to tell how big the machine actually is but it just looks like it needs a little more than that.

 

The old bobcat's like mine actually had a backhoe attachment. It mounted right to the front of the cab with the bucket removed. Quite the unit. I would love to find one.