Got another saw

Well after getting my first saw a couple weeks ago I just saw this deal at the flea market and got this STIHL 310 with the case for $250. It starts up on the first pull and looks like a little bit of use but not much. But did I get a good deal? Also how is this saw? As it’s only my second saw I’m not sure what to expect.



Sent from my iPhone using Tapatalk

 

Best of luck with it!

 

Yes it appears the CAD is starting I bought an echo 4910 2 weeks or so ago then I saw the deal on this 310 and saw it is a bigger saw at 59cc and I’ve been wanting a bigger one so i decided to pull the trigger on it lol

 

Yup. CAD for sure.
Can't say I didn't warn him.

Best of luck with it. Be safe!!

 

Congratulations on #2. I don't have any experience with this particular model, but on paper it looks decent anyway:
Model Profile: MS 310
As far as CAD goes, the only thing I would caution against is owning more than one in the same CC class. Of course there are exceptions, and just because 2 saws have a similar CC engine, absolutely does not mean they'll perform the same. IMHO money spent on duplicates could better be spent on saws you really want/need.

 

Congrats. My BIL bought a 311 years ago and it’s always treated him well.

 

Nice. Save up and get the 4910 the XS treatment and air filter upgrade. You won't be sorry

 

Where do I get that stuff from or how?

 

ImGunnar you just reach out to the builder. XS is huskihl Kevin.

 

People here are so great. Always willing to help you spend money!!

 

Oh okay I had no idea I’ll have to reach out and talk to him

 

Good luck with your saw

 

Sounds like a decent deal based on what I've seen. If there is little to no wear on the bar paint then the hours are very low.

The 310 is 59cc and a good firewood saw. Can handle a 20" bar. Along with your Echo wearing a 16" bar I think our have a good two saw plan.

For many years the only saw I owned was an MS290 which is a step below the 310 at 56cc's. Very reliable farm/ranch level saw. Cant say anything bad about it.

Sounds like you've caught CAD which is okay. That's what we're here for!

 

I’ll have to take a picture later but there’s a decent little bit of wear on the bar but nothing too crazy. Also the 310 came with the 20” bar which is cool but actually my echo also came with a 20” bar on it. Should I put a smaller bar on it ya think? Also thanks for the good news on I got a decent saw!

 

Even though I have a bunch of saws, I run a 16" on my 50cc saws and 20" on the bigger ones. Mostly bring two saws on a cut. 20" bar will cut some decent sized logs.

I tried a 20" on my 290 (came with a 16") and it worked buried in big wood but it seemed under powered for its CC size. That's a generally accepted consensus for the 290 which ive since learned. Dont know about a 310. I have never run a 310 and your results may vary.

Im the type of cutter who doesn't like more bar than needed. Some guys like a longer bar as it saves their back as its less bending if limbing. A lot of my cutting is done in tangles and uneven terrain so a longer bar is too clumsy for my liking. I prefer to use the bumper spikes when I can.

My higher CC saws can run longer bars when the need arises.

So to answer your question i see nothing wrong with two different size bars but as your saw herd grows as does your cutting experience you will know best. I don't really like having multiple bars as its more chains to keep on hand and sharpen.

 

The link for the air filter upgrade kit is on your other thread about the 4910...

 

So true
X2