Dad is getting a heat pump. We had to dig this hole for a big electrical box. Not the easiest space to work a pick and shovel in, about 3 feet between the deck and the fence.
time, but not money. Always have to weigh which one you'd rather save. And sometimes you just don't have one or the other.
Do you still hunt deer? Our season is done here except for muzzle loaders which will end on the 10th. Very few hunters down by my house this year. Have to say I really don't like shooting so close to my house.
No snow cover here. So far, the ocean is keeping us warm enough to melt anything that comes along. Further to the west, towards the mountains, they have snow and some ice starting to form on the ponds. Two storms moving in. One tonight could lead to very slippery conditions. Another tomorrow evening will have heavy rain and high winds coming in off the ocean. No snow with that one. Potential power outage warnings
Happy birthday JimBear !!! yooperdave is it a "post a picture of a cake and it's your birthday again" day?
Yes but not as much as I used to. Also had a few problems this year which kept me from hunting as much.
Lost power last evening due to the heavy wet snow that was falling since noon. I don't know how long it was out but the vapor fire is back on line once again. 66 inside this morning. I made a fire in the NC-30 last evening so didn't lose much heat overnight. Not looking forward to the snow cleanup today at all.
Was in fort Kent yesterday. They have about a foot on the ground and a ton of ice. Houlton north got a few inches that ended as rain and froze. It’s pretty bad if it didn’t get scraped off. Not going to be good if it doesn’t thaw soon.
Any paint/body guys in here? Couple years ago I plasitdip’d the chrome on my truck. Basically to see if I like the look. I did, so off the dip came, did a light scuff and rattle canned some good stuff on. Couple years later it’s peeling off. Any ideas? Scuff not rough enough? Off it’s coming… Using a 120 grit disc. Is a primer a must? I do have 2 cans sitting around I could use. I did not use any last time. I did prep with multiple alcohol wipes till perfectly clean before paint.
