Chainsaw Pics...

Couple Old Remington SL-9 saws

 

My favorite vintage saw for last. I have a few of these but none of the rest are like this score off the Grand rapids MI Craigslist a year ago or so. Last year made, 1976. I opened the box. Took Video to have future verification. Wife had the display case made.



All the literature and a soft case were in the box.

 

I got my 357 up and running after porting it.
third tank of gas after porting
14.7 seconds
72DL .375 full comp full chisel square filed chain

 

XS365sp and the SCarr394.

 

I was able to get out and get one of the log piles bucked and stacked today. I have about 5 more cords in logs that need skidded out of the woods to be bucked and about 15 cord already bucked on pallets that needs split yet... I'm always behind... But I had all three saws out today and enjoyed running them all I ran a full tank of gas through each of the saws and had to go re-fuel the 362C to finish noodling some of the last bigger rounds. Since I cut at 21 - 22" for my woodstove I really need to get a 24" light bar for the 357 so it can share the noodling duties with the Stihl. The 357 is fun to run and cuts fast, but it is a gas hog compared to the strato 362C.

 

Hello, This saw is not a new one. But it is new for me. Stihl 440/460 hybrid.

 

And I see it's from the great white north! Killer saw from a great builder!

 

Nice saw, I hear CFB builds a strong saw.

 

I am the not so happy new owner of a Stihl 241. A couple of fellas were wanting one so I called & checked to see if was still there, yes it was & they were interested. I went & bought it. One of the fellas never replied back & the other wanted a NIB.

So I gots a new saw sitting in the back room. It has a bit of surface rust on the muffler & chain from sitting on the shelf for over a year. If I had know I was going to get stuck with a saw I would of bought the 400 or the 461 sitting there.

 

Here is a few of my current hobbies

 

Yes, CFB is an exellent builder, and the most important, You can trust him.

 

Had one of my favorites out yesterday. It's in pretty good shape and runs like a top.

 

This saw has never been fired? Its the M-Tronic version i assume. I wonder what the insides look like from setting. A 241 is the next saw I planned on buying. I'm interested. PM me and we can talk.

 

I’m impressed every time I open the caps and they’re attached by chains. I’ve gotten used to flippys, but dislike the string and ball connection that comes out of the slot.

 

Clean specimen. You run it much?

 

No, I don’t use it much. Haven’t even dulled the chain since I got it. It starts easy and runs strong, so I like it. Just never had a 60cc saw, so I’m figuring out what size wood it’s best suited for. Typically I’ll use the 261 and a 70cc saw. Sometimes it’s just too many choices.
Ordered a quad axle dump of gravel today, so I don’t buy another saw.

 

all 241's are Mtronic.

 

Chain Saw Collectors Corner Your Host

I’m sure a lot of you visit Mike Acre’s site. If you haven’t visited the Your Host tab, here’s an interesting read

Thanks Mike

 

Huh. Not sure where I got the idea they came both ways. Maybe on the European site both are available.

 

Nope. Lol. Must be another model I'm thinking of.