Was cutting wood a few days ago and dumped bar oil in both the bar oil AND gas tank! Doh!! Heard about guys doing and wondered how but quickly found out...it’s just a simple mind lapse. next is I have my pool open and my owb still running. Had the heater fan on for about an hour this morning because it was 65 and we’re all home.
I’m seeing similar snafu’s like that here too.... Just don’t accidentally pour bar oil in your pool thinking it’s chlorine....
I filled up the fuel tank on my MS460 a while ago and forgot to cap it. I flipped the saw over on my tailgate, and the fuel spilled out all over the bed of my truck. The whole tank emptied before I realized what I’d done. Chit happens.
I filled the gas and oil on the 261 yesterday. Got a phone call and while I was talking flipped the saw up and carried the jug of bar oil back in the shop. Came back to a puddle of oil on the tailgate.
Said it before on a similar post. There are days I will do that two or three times. Just run into “senior moments”. Occasionally have a “Depends moment” when things go haywire.
Ive never done that but have neglected to put caps back on and spilled. Hate to tell you but you're getting old! Wait'll you get to my age? Does the OWB heat the pool water?
just yesterday I was welding parts that had to be wiped down with acetone just before the weld was made. At one point I soaked the wiping rag with coffee from my thermos.
I just did the opposite, poured gas in the oil tank....realized it as I was doing it. Dump and refill.
I loaned a neighbor some gas, helped her put WWW's premixed gas into her gas tank Honestly it took both of us to get it in her tank using the darned no spill spigot, that was actually a lot funnier
Same here, gas first. I really don't why I do it that way since I rarely run it completely out before refilling. Like when I open my cigarette pack I always start taking from the left side of the pack for no particular reason.
