Does anyone know a source for the pin sleeves in the white connector (plugs onto white 11 pin plug) on the Harman Stoves? I need to add a wire to my existing harness for the Yellow conductor (position 8 of the 11 pin plug) for the addition of an igniter in an effort to convert a P61 to a P61A. A reference of the wiring diagrams for each of the stoves (I have both a P61 and a P61A) shows the difference of the Yellow conductor for pin position 8 and an additional conductor (lt. blue) from the pressure switch (same side of pressure switch that goes to auger motor) connecting to the igniter; I have no hopper switch on the P61. I have the new board, the new fire pot, the new ignitor & cradle kit already, so I'm just in need of the pin sleeves for the white connector or I must buy a complete wire harness, which would also mean an entire rewire of the stove which is kind of senseless since it is only lacking one conductor for the connector that plugs into the white 11 pin plug. I'm hoping someone has already done a conversion using the existing harness, thanks in advance for any input.
I just replaced the harness cannibalized from an old stove. Can you strip a wire and solder it in place?
