Offering up my 16" Stihl Rollomatic bar, original Stihl chain(saw has 1 tank of fuel thru it), 2 Oregon 22BPX067G(NEW) and 2 Oregon 22LPX067G chains(USED but sharpened). $90 shipped to lower 48 or best offer. Pictures upon request. PS I'll throw in the sprocket!!!!
The bar came off my MS261 C that has had less than one tank of fuel thru it. 2 chains are brand new, 2 are slightly used but sharpened and the original chain off the 261, so 5 chains total and the original 7 tooth sprocket from same saw. I had an 026 and 024 super at one time that these chains would have fit.
Currently have an 18" bar on my 034AV would those work on it? Not well versed on the Stihl, run my Poulan mostly.
I'm thinking your 034 uses 3/8 chain, this is 16", .325, .063. I switched from .325 to 3/8 with no problem. Talk to your Stihl dealer, they may be able to help you out. Where are you located, I'm 30 miles east of Elmira, NY.
Well howdy neighbor. Located just outside of Olean NY off Rt 16 Unfortunately my local dealer isn't big on customer service. Ordered an air cleaner for the mower I'm working on, as it was the only thing they didn't have in stock. After nearly 2 weeks stopped by. "Oh yeah, here ya go." Woulda been convenient had they called when it came in. But hey, it was already paid for, so why bother eh. Stopped on to get fluids to change oil and it's filter on Kubota. Stood at the service counter for about 5 minutes while they carried on a conv about 8 ft away. Finally, "Umm excuse me." "Oh, can I help you?". Felt like saying "Nope, just looked like a great place to hang out." But didn't. Next nearest dealer is in Bradford, Pa.
I have 2 dealers close by, both are very helpful and neither will give discounts. Did you ask about if the bar will work on your 034?
I’d be interested if the first people pass. I’m east of you in Bennington Vt. I run two ms250s here. One 18 and one 16. Good saws. Sent from my iPhone using Tapatalk
The internal size of the sprocket is smaller than the one for the larger saws. I went from .325 to 3/8 chain w/ no problem w/ the correct sprocket.
His 034 could have been upgraded to the larger one. Either way, it'll work the addition of a couple cheap parts