They've been advertising $75 a cord. I'm right down the street from their yard so no delivery charge. [MEDIA]
I just paid $490 for a full load, about 6.5 cords. Try Palazza and McDonough on the south shore.
No, I just do it first thing in the morning before a reload. I just keep the brush moving, it only takes 5-10 seconds so not enough time to melt...
I've never had any problems with the cat clogging. About once a month I attach a brush to my shop vac and vacuum the front of the cat. I once...
Thanks for the info on the screen. I've developed a big hole in mine so I was going to order one next week along with some new gaskets for my...
I think it's interesting how differently the PH performs in different setups. I consider myself lucky if I have enough coals left after 10 hours...
It would probably be easier to extend the hearth, if possible, and get a rear vent stove. The Woodstock PH would work with the short legs.
I always thought the area above the door (I have a PH so the area above the glass) is hotter because more heat comes out the glass than anywhere...
After running the PH for a season I consider "soft heat" to be nothing more than low heat. There were a few times I wished I could of removed the...
In my state code requires 1/2" sheetrock or 3/4" solid wood on the interior of all walls. Either of these would have to be installed under the...
Not sure about the "newest cats" as I bought my stove in Sept 2013. The original cat had a slight warp in it so Woodstock sent me a new one last...
Thanks. I noticed they didn't say to flip the combuster around on the PH to even out wear. I thought the PH combuster could go in any way but this...
White oak repels moisture, that's why it was used for boat building. Red oak absorbs moisture, that's why it's only used for interior items.......
Came down early this morning to a nice bed of coals, the stove was 150-200. That's about 12 hours after loading. I vent out the back to a T, then...
I loaded the stove on a good bed of coals, stovetop was about 250. I let it catch and burn with half air for about 15 minutes. Once I noticed the...
Thanks for the updates. It was interesting to see the pics during the burn.Today I fully loaded my PH with some hardwoods for the first time...
I loaded it back up and went to bed. I had about 2" of ash and a few small coals when I initailly loaded it up. I normally get about 7-8 hours out...
I lied. When I opened the door the 4x8 was still fully intact and the 4x6 was only half gone. They burst into flames when I opened the door. These...
After about 8 hours the PH is sitting at about 250 stovetop, the side soapstone panels are about 300. I'd say in about 1-2 hours the whole stove...
Still burning, the temp. has dropped to 380 or so.. No way I'll get 14-15 hours out of this load. I was hoping for 10 hrs. or so above 200*F....
