25 Bags into my M-55 by Thankgiving this year. Would be burning less but window AC units are still in (till this weekend, I've been lazy)) and...
The burn pot liner on a M-55 is easily removable. I have an OEM set and an Aftermarket set. I am getting ready to weld up the OEM set. I...
I replaced my Auger motor (after the spoon incident of 2022) with Aftermarket last year and have been nothing but happy. Also replaced the burn...
IIRC Oven cleaner is Lye and a few other solvents based. It is an excellent grease remover it might loosen the carbon as well. I have not tried...
I burn BB store pellets and when I do a clean out I have resorted to using a 5-1 tool to scrape the clinkers out of my Burn Pot Liner. This has...
I compost mine. Along with any ash clean outs. Both the vacuum and the ash pan dumps. I also turn wood so I have many barrels of wood shavings...
Thanks Guys, Other than spinning the stove around in place (Fricking thing is heavy, lol), it was an easy job. I looked on the web for how-to's...
Hey all, Well it had to happen. The Auger motor on my Enviro M-55 Cast FS finally died last night. Knew it was gonna happen as its been getting...
I was surprised too. I figured the Stove Chows would be much warmer than the Green Supremes. They seemed to burn about the same flame wise. I...
As asked for, Here is what I got when measured. These temps are relative. The test probe did not move between measurements Green Supreme...
I have 2 bags of Stove Chows left over from a couple of years back. And I have a fresh ton of GS Allegheny I picked up last week. If (time and...
I have burned 2 tons of them this year Just picked up a 3rd ton last week. All cost me $308 a ton each. #1 was Allegheny Mountain Hardwood #2 was...
Thanks guys, She admitted to it (shes good like that). She even had the right index finger middle knuckle in her teeth and looked up bashfully at...
Came home yesterday from helping a woodworker buddy build a cannon base. Walked in and found the pellet stove was out. :eek: Checked hopper and...
Greetings all, A few posts ago Enviro Max pot liner in my Omega figor was mentioning about his Pot Liner I posted that I had purchased a...
I bought my Aftermarket M-55 agitator rod and burn pot liner from Wood Pellet Stove Parts and Grill Replacement Parts IIRC I ordered one item...
Repair looks great. Its only temporary unless it works. :D On my M-55 all I have had to replace is a few of the momentary switches on the...
I find messing with de-soldering braid is all about the right heat and pressure at the joint. Sometimes it works great other times.......well it...
Instead of De-soldering braid I use a Solder Sucker like this one. [IMG] I find it easier to remove solder from around component legs than the...
I have one of the Harbor Fright Predator 2000W Inverter Super Quiet Generators. Bought it 4 years ago. A Chinese Honda Clone . AKA Chonda I love...
