After a good rebuild? Naa... run it a touch rich and listen closely to the tune. After a questionable rebuild? Lots... It’s hard for me to trust...
Only way to tell is close inspection of both... Good point, Chaz. I had a 290 in that met a sudden death. A crank lobe was cracked! First time...
Is that one pic of the exhaust after clean-up? Anything raised or uneven up there would be bad. You could grind away at it but you would need to...
Nice! Any idea on how long you got out of those hoses?
They have a few known issues and can be unreliable. I don’t recommend them. They can be for the hobbyist or someone looking to fix an OEM saw on...
As mentioned above, it depends on your bolt mounting pattern. Commercial splitters (well, some) have the trailer style 4.8 x 12 but still...
That case splitter should be good for you. I have the oem Husky version and have split dozens of saws over the years with it (Stihl, Husky, Dolmars).
That method works fine for some saws. My experience is that the larger saws and Stihls with poly flywheels can be stubborn. The pullers work great...
Depending on the series and current pricing, oem gasket kits are the way to go. I paid $43 for an 1122 kit a few weeks ago. I’ve paid as low as...
When seals really go bad like that, bad main bearings should be suspected. It’s a Stihl proprietary bearing.
Check that bearing, too.
Watch for metal bits in the case. I’d consider splitting that one unless you’re confident you got all the pieces. Also wiggle that crank and...
Does your town have regulations for structures? If so, get a permit and do it to code or else get ready to defend yourself at some town meetings...
029/290- 56cc 039/390- 64cc Stihl MS360- 62cc (ish) pro saw design. Do you mean trade in the saw? Most dealers won’t give ya much. If it...
Run it.
Yep. When you need to get a property properly surveyed, you see why many people avoided updating their maps...$$$$. I’ve invested (how I...
Exactly. After off-campus college days of seeing my breath in my bedroom and kitchen, I vowed to never be cold indoors again. Get the bigger stove.
$40? Yes, that’s a great deal. Keep him happy if ya can.
I definitely won’t bash Stihl’s 1127 series. They do the job they were intended for as mentioned above. I also don’t want to clutter this thread,...
So 54cc (if regular 029) to 64cc, a port job, increased compression from the popup, hopefully a thorough inspection, new hoses if needed, a...