In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Just to show I did a little work yesterday

Discussion in 'The Wood Pile' started by Backwoods Savage, Jan 15, 2019.

Page 1 of 2
  1. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,998
    Likes Received:
    296,110
    Location:
    Central MI
    More dead ash.

    101_0383.JPG

    Here is the stump from the one ash. When I cut it, I could not get the saw closer to the stump else I'd have gotten maybe one more log from it, but I didn't worry. 101_0384.JPG

    And here is the rest of that one ash. I had the atv but will wait until I take the tractor back to try pulling it down. I did pull it part way down until it dug into the ground and I could not pull any more. 101_0385.JPG

    Now the funny part is this dead elm. I figured on cutting it before leaving this area. Forgot... I just packed up and went to a different area where I had more logs to get out. 101_0386.JPG
     
    Backwoods Savage, Jan 15, 2019
    #1 Top
    Greg, campinspecter, Skier76 and 52 others like this.
  2. bear 1998

    bear 1998

    Joined:
    Oct 29, 2017
    Messages:
    2,016
    Likes Received:
    16,253
    Location:
    S.C.Pa
    Whats ur main wood gonna be when ur ash is practically gone ?.....or should i say....when you loose your ash. :faint:
     
    Last edited: Jan 15, 2019
    bear 1998, Jan 15, 2019
    #2 Top
    metalcuttr, Maina, savemoney and 22 others like this.
  3. clay shooter

    clay shooter

    Joined:
    Apr 30, 2017
    Messages:
    1,417
    Likes Received:
    7,305
    Location:
    ENGLAND
    nice bit of woodland you have there dennis.
     
    clay shooter, Jan 15, 2019
    #3 Top
    metalcuttr, Maina, savemoney and 16 others like this.
  4. MikeInMa

    MikeInMa

    Joined:
    Dec 4, 2016
    Messages:
    14,614
    Likes Received:
    104,373
    Location:
    Southern Worcester county
    At least the elm is upright and ready when you are
     
    MikeInMa, Jan 15, 2019
    #4 Top
    Maina, savemoney, dingbat and 16 others like this.
  5. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,998
    Likes Received:
    296,110
    Location:
    Central MI
    We still have plenty of elm. Lots of soft maple. Some oak. There is always some pine. Don't think we'll ever run out; just won't have the ash.
     
    Backwoods Savage, Jan 15, 2019
    #5 Top
    campinspecter, metalcuttr, Maina and 15 others like this.
  6. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,998
    Likes Received:
    296,110
    Location:
    Central MI
    I got that top out of there today but didn't get the elm yet. Worked mostly in a different area. There is always tomorrow...
     
    Backwoods Savage, Jan 15, 2019
    #6 Top
    metalcuttr, Maina, dingbat and 15 others like this.
  7. basod

    basod

    Joined:
    Nov 4, 2013
    Messages:
    5,048
    Likes Received:
    20,841
    Location:
    Mount Cheaha AL
    I don't have plentiful ash down here - apparently it holds up well standing dead unlike most species.
     
    basod, Jan 15, 2019
    #7 Top
    campinspecter, metalcuttr, Maina and 13 others like this.
  8. Fanatical1

    Fanatical1

    Joined:
    Feb 10, 2014
    Messages:
    2,688
    Likes Received:
    12,291
    Location:
    Ohio
    That’s some nice looking wood you got there Dennis... That elm looks primo to me..

    Thanks for the pics and keep them coming.

    Very motivational for me... I have some dead standing small sassafras on my radar for this spring.
     
    Fanatical1, Jan 15, 2019
    #8 Top
    metalcuttr, Maina, amateur cutter and 10 others like this.
  9. Stoveburner38

    Stoveburner38

    Joined:
    Nov 25, 2018
    Messages:
    335
    Likes Received:
    2,816
    Location:
    Springfield,ohio
    Love dead elm it's dam near ready to burn when split. Nice looking load
     
    Stoveburner38, Jan 15, 2019
    #9 Top
    metalcuttr, Maina, amateur cutter and 9 others like this.
  10. Stinny

    Stinny

    Joined:
    Oct 29, 2013
    Messages:
    14,113
    Likes Received:
    60,514
    Location:
    western Maine
    Nice job Dennis... !
     
    Stinny, Jan 15, 2019
    #10 Top
    Maina, amateur cutter, Backwoods Savage and 10 others like this.
  11. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    847
    Likes Received:
    4,523
    Location:
    Sparta, Michigan
    Good work!!
     
    Armbru84, Jan 15, 2019
    #11 Top
    Maina, amateur cutter, Backwoods Savage and 5 others like this.
  12. 460magpro

    460magpro

    Joined:
    Dec 2, 2014
    Messages:
    462
    Likes Received:
    2,411
    Location:
    usa
    Nice work
     
    460magpro, Jan 15, 2019
    #12 Top
    Maina, amateur cutter, Backwoods Savage and 5 others like this.
  13. Locust Post

    Locust Post

    Joined:
    Oct 4, 2013
    Messages:
    8,794
    Likes Received:
    50,955
    Location:
    N. E. OH
    About time you get your dead ash moving Sav.
     
    Locust Post, Jan 15, 2019
    #13 Top
    metalcuttr, Mitch Newton, Maina and 9 others like this.
  14. Ralphie Boy

    Ralphie Boy

    Joined:
    Oct 25, 2014
    Messages:
    4,274
    Likes Received:
    29,903
    Location:
    Rabbit Hash, Kentucky
    I have 2 large, 24 to 28" diameter ash trees left and about 20+- small ones left on my place. There also about 15 I've taken down but haven't bucked yet. When those are down and bucked I'll gave to make a deal with Brandon Scott to cut on his place. :D

    Nice work Dennis, you're a workin' dog! :salute:
     
    Ralphie Boy, Jan 15, 2019
    #14 Top
    metalcuttr, Maina, T.Jeff Veal and 8 others like this.
  15. Slocum

    Slocum

    Joined:
    Mar 30, 2018
    Messages:
    1,363
    Likes Received:
    10,488
    Location:
    North Central Indiana
    That’s some good looking wood!


    Sent from my iPhone using Tapatalk
     
    Slocum, Jan 15, 2019
    #15 Top
    Maina, T.Jeff Veal, bear 1998 and 5 others like this.
  16. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,825
    Likes Received:
    109,410
    Location:
    KC Metro
    The start of the pile for the GTG...:thumbs: Great Start Sir! :handshake:
     
    Chvymn99, Jan 15, 2019
    #16 Top
    metalcuttr, Maina, T.Jeff Veal and 8 others like this.
  17. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    18,281
    Likes Received:
    119,835
    Location:
    Vermont
    Great pics Dennis.. Keep playing!!
     
    Canadian border VT, Jan 16, 2019
    #17 Top
    Maina, Chvymn99, T.Jeff Veal and 7 others like this.
  18. ReelFaster

    ReelFaster

    Joined:
    Dec 1, 2016
    Messages:
    2,670
    Likes Received:
    18,321
    Location:
    S.Jersey
    Nice work there Dennis!!
     
    ReelFaster, Jan 16, 2019
    #18 Top
    Maina, Chvymn99, T.Jeff Veal and 6 others like this.
  19. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,998
    Likes Received:
    296,110
    Location:
    Central MI
    It definitely does keep very well but ours is getting near the end.
     
    Backwoods Savage, Jan 16, 2019
    #19 Top
    campinspecter, metalcuttr, Maina and 6 others like this.
  20. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,998
    Likes Received:
    296,110
    Location:
    Central MI
    Funny you mention the sassy. I found one today that should be cut as it is on our line but hanging over into the neighbor's field. Right next to it is an ash that fell into the field so I'll get 2 for 1.
     
    Backwoods Savage, Jan 16, 2019
    #20 Top
    campinspecter, bear 1998, metalcuttr and 8 others like this.
Page 1 of 2