In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Git'ter done down in Dixie

Discussion in 'The Wood Pile' started by T.Jeff Veal, Dec 29, 2018.

  1. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    Had time and a break in the weather for a few hours this morning. Got one big oak log CSS and a small one cut. The splitter and I ran out of gas about the same time.
    Got the MS 362/25" bar buried in this log... IMG_20190102_084932550.jpg
    It has one small side that has a little rot/termite damage. Went all the way up the tree to one side of a big fork. Still a lot of nice oak in these rounds, though. IMG_20190102_092246383_HDR.jpg
    Maybe catch a break again tomorrow.
     
  2. Stoveburner38

    Stoveburner38

    Joined:
    Nov 25, 2018
    Messages:
    335
    Likes Received:
    2,816
    Location:
    Springfield,ohio
    That base you got there betcha that makes it nice and solid. Alot nice looking wood.
     
  3. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    Yes sir, it does. We get a lot of big rounds sometimes and it makes sliding them around a lot easier. It sits a tad bit higher than the spurs on the splitter foot. I usually use it on my older splitter, but it works great with the new splitter. Roll a round up to it, flip it over, and slide it to the foot. Might do a short video next time we have some bigger rounds.
     
    Screwloose, JoeinO, bear 1998 and 9 others like this.
  4. HolsatiaRedneck

    HolsatiaRedneck

    Joined:
    Nov 9, 2017
    Messages:
    1,134
    Likes Received:
    6,204
    Location:
    Schleswig-Holstein
    At least you could give em a chance like Josey did but they wouldnt even try anyway dont they?!
    Is it Red Oak? The log with the rotten bit at the end..:popcorn:
     
    Last edited: Jan 2, 2019
    Screwloose, huskihl, imwiley1 and 6 others like this.
  5. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
     
  6. ReelFaster

    ReelFaster

    Joined:
    Dec 1, 2016
    Messages:
    2,521
    Likes Received:
    17,221
    Location:
    S.Jersey
  7. Ashwatcher

    Ashwatcher

    Joined:
    Apr 29, 2015
    Messages:
    2,001
    Likes Received:
    13,648
    Location:
    West By God Viginia
    What’s not to like? She’s doing it the right way and he has modded the machine to prevent doing it the wrong way...:whistle: Anything too big to lift he gets the workout from mauling it to size...Brilliant I say...:smoke:
     
  8. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    Haha. Look at the last pictures, we do it the right way :thumbs::yes:with the big rounds too...that's where the metal foot rack comes in so handy.
     
    Screwloose, bear 1998, Thor and 3 others like this.
  9. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    Got a chance to work a little more yesterday afternoon. Still got some more to go.
     

    Attached Files:

  10. Stoveburner38

    Stoveburner38

    Joined:
    Nov 25, 2018
    Messages:
    335
    Likes Received:
    2,816
    Location:
    Springfield,ohio
    Is that elm T.Jeff veal
     
    Screwloose and bear 1998 like this.
  11. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    No sir, red oak.
     
  12. Fanatical1

    Fanatical1

    Joined:
    Feb 10, 2014
    Messages:
    2,686
    Likes Received:
    12,278
    Location:
    Ohio
    You do nice work sir! :)

    Looks like everything is cut to the same length and split and stacked perfectly by your partner.

    Motivates me to get out and cut and put up some pretty oak stacks...
     
  13. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    yes sir, always try to do my best. My hunny likes to run the splitter, she stacks some, but said she doesn't do Tetris like I do...lol...we work together on it.
     
  14. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    IMG_20190122_155129847.jpg IMG_20190122_155141737.jpg Guess what we split today...
    Trying to get a big pick up load ready for another new customer.
     
  15. JoeinO

    JoeinO

    Joined:
    Oct 7, 2018
    Messages:
    491
    Likes Received:
    3,293
    Location:
    NEO
    Looking good down yonder T. Jeff Veal,
    Nice Post T. Jeff thanks for sharing. The base reminded me of last spring. I have a little Ariens with a thick end of the beam probably 3 inches. Got tired of struggling with the big rounds so I cut 3 straight round limbs just a little higher than the beam end. They acted as rollers and made it so much easier. One of the rare occasions that I felt kind of smart.
     
    FatBoy85, Screwloose, Hammy and 3 others like this.
  16. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    Great idea. The base works really well. Rounds slide on the metal pretty easy.
     
  17. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    Had a good day yesterday. My hunny came up and supervised me bucking up the logs, then she had to go run errands. I had cut the smaller logs in 16" rounds to finish the half cord rack and the other logs 18" for the other rack. I split the short rounds and had stacked almost all of it, was gonna take a break, get some gas and start on the longer rounds. Well, the phone rang, an older lady was needing a load of wood. I told her is wasn't dry, she said she had been burning green wood in her smoke dragon and all she had left was some 2x4 cutoffs from a construction job her son works for and their saw was broke. So, I unstacked the hickory I had just done and some more oak that was behind it, got it delivered yesterday afternoon. IMG_20190124_092935105.jpg IMG_20190124_100100643_HDR.jpg IMG_20190124_135810148.jpg
     
  18. Midwinter

    Midwinter

    Joined:
    Aug 8, 2017
    Messages:
    19,846
    Likes Received:
    130,464
    Location:
    Nashua, NH
    Your phone will be ringing off the hook with the coming cold snap!
     
  19. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    23,987
    Likes Received:
    146,278
    Location:
    Country life, Ga
    We have a little time this morning after running some errands to cut, split and deliver some big pecan limbs to the Queen of the hill's house, (aka Mama). She was happy to see us... IMG_20190126_120847234.jpg IMG_20190126_120901888.jpg
     
  20. Thor

    Thor

    Joined:
    Apr 3, 2016
    Messages:
    2,160
    Likes Received:
    16,839
    Location:
    Genoa City,Wi
    :tip:Very nice T.Jeff Veal