In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Polyglass

Discussion in 'The Wood Pile' started by BigPapi, Oct 30, 2018.

  1. BigPapi

    BigPapi

    Joined:
    Aug 19, 2016
    Messages:
    1,870
    Likes Received:
    12,766
    Location:
    The hills of Western MA
    Scored a roll of Polyglass 160mil today - reading on the interwebs a little, looks like a fiberglass reinforced torch applied rubber roofing product.. Thinking of how best to deploy it, my first instinct is to cut the whole 40" wide roll in half and use it to cover single row stacks for drying. Seems awfully thick and stiff - is this typical rubber roofing or something that's going to give me a headache if I try putting it on top of a lumpy row of splits?

    Also, is there a standard length in a roll of this stuff?

    Please forgive my total FNG level of knowledge on flat roofing materials! :)
     
    amateur cutter, mat60, Chaz and 4 others like this.
  2. Stephiedoll

    Stephiedoll

    Joined:
    Oct 8, 2013
    Messages:
    4,148
    Likes Received:
    29,811
    Location:
    Omaha, NE.
    No ideas, but sounds way cool.
     
  3. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,513
    Likes Received:
    54,567
    Location:
    SE Mass
    If it's Johns Mansville they likely have use instructions.

    If it is the bitumen I think it is it will get lumpy under the sun and mold to that shape, you may need to attach it something flat like plywood.

    If you can unroll it when it is cold it might work well.
     
  4. BigPapi

    BigPapi

    Joined:
    Aug 19, 2016
    Messages:
    1,870
    Likes Received:
    12,766
    Location:
    The hills of Western MA
    It is bitumen - if I understand you bill, this will be stiff in the cold but flexible under the summer sun? And it will want to hold the shape of whatever is underneath it? Flexing the corners it seems like pretty stiff material.

    Might be better off saving this to roof a future wood shed it sounds like.
     
    billb3, amateur cutter and mat60 like this.
  5. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,513
    Likes Received:
    54,567
    Location:
    SE Mass
    Yeah, it will likely get quite soft in the sun and try to take the shape of whatever it is on.
    Thinking re-usability here.