Well, then you might get away with one beer.. err cup.. holder, but that would be about it. A second would probably put you over the weight limit.
Probably not right now I use the truck bed for the saws and other equipment needed. It lets me keep it all locked up nice and safe. I might make one for the truck bed though. I considered a small flip up table for gas, oil and chain swapping on the side of the trailer though.
I’ve got a design in my head for a saw holder that can be removed from my truck bed and set in a shelf to hold the saws either in the truck or on a shelf. Problem is it needs to be dusted off it’s been a few years since the idea hit me.
Oh, I get it now this trailer is for the equipment and the "new" trailer is for wood which will be pulled behind this trailer, tandems, genius.....
Finished welding the bulk head tonight and it’s off to bed soon I’ve got to be up at 2am.Tomorrow I’m going to be moving on to the side gate hinges hopefully.... Maybe a cup holder or too as well
Just the splitter and a few saws. Thanks redneck I’ll let ya know.. Working on the side hinges but I’m done for the night tomorrow will be the hinges and side gate. Then the expanded and emt for the wiring. I’m getting excited!!
Tomorrow will be a fun filled day in the garage filled with smoke that is! I’m really liking masks I can’t turn the vent on or I’ll loose all my heat! Things left Weld and mount side gate hinges Weld side gate to hinges Weld expanded on ramps and bulk head Run emt for wiring Mount junction box Clean frame Paint Run lights and wiring. Buy bolts and deck boards Lay decking and put sides on. Maybe.... cup holders Doesn’t sound to bad right! If nothing else pops up should be around $650 after decking and bolts but to have the trailer customized how I want it that’s worth the price to me.
Link to a great printable stick welding chart if anyone needs it.. Welding 101, Welding Tips and Hints, Welding Glossary - Hobart Welders
Forgot I managed to rip the cord out of my tool shop brand grinder today and had enough tore that thing completely apart! Rewired with 12 guage sjo ( what I had on hand ) and cleaned it all out. Cheap little piece of crap. It works better now though so it was worth it!!! The old blue ryobi just keeps ticking!
