Pellet heads!! What's up today?

I was thinking the same thing Larry

 

Yes... but keep in mind, the gasket is doing the sealing.. not the silicone...
so apply a small amount and not on the whole thing (in my opinion.)
You just want to hold the gasket from falling off every time you open the door...

Dan

 

Just when I thought this chit was pretty much over with.........

 

You know that Mother Nature likes to screw with us the good thing is this is supposed to move thru quickly and tomorrow is sunny and 40* + so let the melting begin.

 

We are being told 3 inch snowfall during the night. Most of the storm going out to sea south of us.

 

Thank you my southern friend
It was good and building up my daily beverage intake is better'er

 

Check out next weeks forecast

 

Could be that Pallet Pete and pelletpete are one in the same? April Fools is just around the corner


Welcome aboard pelletpete !!

 

I'm loving them temps G

 

Well the white Chit has started falling here .

 

Unlike
None here if you're wondering

 

None here either maybe later though. Ain't going to worry about it.

 

Overnight with 3-4" predicted here then warming up again so no worries.

 

Cracked and lost a tooth 4 years ago so decided to get an implant. A year and later all was done (took 2 years to pay it off at zero interest rate) . 98% success rate and they say I wont have to worry about that tooth again.

Guess where I fall in the percentage area....WTF

After issues on Christmas Eve with the crown and abutment (post that screws into the implant and holds the crown), dentist office calls 2 weeks ago and says the surgeon wants to look at the implant. I figured it was more of xray and consult but I knew I was in trouble when they came in with 2 covered trays . In comes the doc and he says he needs to numb me up. I ask why and he says he needs to pull the gums back and "look at the implant"

Didnt feel a thing as he did what he had to do. He found the implant ois structurally fine but there appears to be an issue with the upper inner threads of the implant. There is a lower set of threads as a fail-safe so we are trying to do this without have to replace. But he did have to do a bone graft while checking and cleaning the area.

Hope this works without having to remove and replace-at least it is all warranty and not costing me anything (monetarily that is). I dont even want to think about what it takes to remove something screwed into the jawbone and is now fused to it.

 

Ouch G , hope this all works out for ya man