hows you thread

Jason how come you can't plastic weld it with a pencil soldering iron

 

Haha!! Yes I do!

 

They can add calcium chloride, but it can make it set up too fast and also it weakens the floor a little. I'll have them add a little though. But it still has to be kept above freezing for awhile

 

Took mum out for dinner. Gonna relax for a bit and hit the hay

 

fast setting concrete sucks

 

That is what I am thinking. Something else to order from the 48. Now I need a chain builder.

 

chain builder ?

 

Best answer

 

Chain sharpener. My local does not have Sq/sq at the stihl shop.

 

Have Dallas sell you one of his and ship it up. The learning experience will pay for the shipping

 

I am need to find a source for chain? I have always ran Stihl chain and round file.

 

This is sounding like a plan.

 

Stihl is good chain. Probably the best, because it's hard. But it can tear up a $10 square file pretty quick if you push too hard

 

tom what size chain are you planning on running

 

Have you looked at any of Shawns chains? Are they leaning?

I don't believe that now. Good to have one to look at? Yes.

 

Won't be long and this will be sounding like your plan



I ported this for one of our friends on OPE.

 

the ones who had me send them chain said its easier to follow when learning

 

The cap has a thin paper gasket. It’s removable to service carb.

Tom, get a loop or 2 from Dall. Some great chain! If you are always in softwood, Oregon might do just fine and it's easier to file.

 

I think I may go 16" on the 026. What y'all's opinion. I will use it for falling. I target 5-9" trees. I have a 20" on the 261, all other saws are 25 or 28 inch.

 

Dang, I have to wait till I get home to watch.