In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Breckwell P22 Fan Noise

Discussion in 'Pellet Stoves, Pellet Fireplaces, Pellet Furnaces' started by KatwillNY, Feb 18, 2014.

  1. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    So my 11 year old Breckwell is making a a noise over the last few days and for that reason I havent ran it much. It appears that the noise is coming from one of the fans. Earlier this season I replaced one of the fans but now it seems that the other fan is starting to go. ARRGG. I cleaned out the fan as it had some crud but the noise persists. Sounds like when a fan needs oil but i dont see anywhere i can add oil to it. I took a quick video of it.

    Time for a new fan or can this be saved?
     
  2. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    Which one is it? Most convection motors have oil ports. The squeak def. sounds like a dry bearing.
     
  3. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    It's the one that blows air into the room pete. Last month I changed the exhaust fan.
     
  4. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    Did you pull the motor and clean it? If not, you might want to give it a thorough blow out and cleaning and try to drip some oil on those bearings.
     
  5. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    My guess is that there are oil ports on it. Check the pics below. Occasionally they will have plastic plugs in the holes like pic #2.

    Also, sometimes the holes are on the underside....you have to remove the blower assembly to check all the way around the motor. That's how mine was....I took it off and rotated it so the holes were on the upper surface facing the rear of the stove to make for easy oiling if I didn't need to remove it for cleaning.

    If you find them, 2-3 drops of oil each and cross your fingers.
    blower lube ports.jpg
    ConvectionBlowerOilHolesSC.jpg
     
  6. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    Guys,
    I took the fan apart and brought it to our shop. It had a lot of dust, so much so that I could not see the fins. I know its bad on my part, really bad. The fan was hard to spin it was so bad. I cleaned it out very well and put oil on it. It spins freely when i blow on it with a compressor. The noise also stopped after I oiled it up. I will mount it back up tonight when I get home and update the post. Thanks again. Very bad on my part (I know Pete, I know" lol. I used White Lightning Grease and wiped off the excess.
     
    Last edited: Feb 19, 2014
  7. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    Pete, i found the oil ports. Thanks. Whats the best oil to use for this?
     

    Attached Files:

  8. slvrblkk

    slvrblkk

    Joined:
    Oct 6, 2013
    Messages:
    6,647
    Likes Received:
    29,535
    Location:
    Northampton, PA
    Any of these will work...

    upload_2014-2-19_14-14-43.jpeg
     
  9. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    Thanks Steve. I have these.
     
  10. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    No problem......use the Blue can.
     
  11. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,636
    Location:
    Northeast Oh
    Yep. The blue 3-n-1 is the electric motor oil and would be best. The other would work, but I prefer the blue.
     
  12. swags

    swags Moderator

    Joined:
    Oct 3, 2013
    Messages:
    4,455
    Likes Received:
    13,240
    Location:
    NE Ohio
    I need to oil the motor on my blower too, it's squeaking
     
  13. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    Git 'er done! Cold weather coming again next week.
     
  14. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    Are you serious Pete, its darn near 50 degrees today. Thats it man ,its spring from here on out. lol
     
  15. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    I wish I was kidding, but I'm not.....nighttime temps especially.
    temps1.jpg
     
  16. KatwillNY

    KatwillNY

    Joined:
    Oct 24, 2013
    Messages:
    340
    Likes Received:
    976
    Good grief this winter just wont let up.
     
  17. RockyMtnHigh

    RockyMtnHigh

    Joined:
    Jan 17, 2014
    Messages:
    641
    Likes Received:
    1,130
    Location:
    Bailey, Colorado
    2-3 Months guys, buck up! But then all we have to talk about is food and BEER! oh well, I can live with that :p
     
    slvrblkk likes this.
  18. eatonpcat

    eatonpcat

    Joined:
    Oct 5, 2013
    Messages:
    10,268
    Likes Received:
    58,385
    Location:
    Eaton Township, OH
    I love food and beer!!
     
    DexterDay and smoke show like this.
  19. smoke show

    smoke show

    Joined:
    Oct 4, 2013
    Messages:
    2,983
    Likes Received:
    13,948
    Location:
    Pittsfield, Wi
    x2!
     
    DexterDay and eatonpcat like this.