I have been only cutting tree tops this year so far so all I've been using is my 14 and 16" saws. I decided I need to run some fresh gas thru my 18's and 20's. I have a sugar not far from the house that's been down about a year and a half that's about 20" that would be perfect. I got the Dolmar 5105, JD CS56 and my 028 super gassed, oiled and sharpened and really enjoyed bucking about 18 rounds before it got dark and I still have about 18' of the big end and some of the top remaining. I'll get the 028 wb ready tomorrow and see how it works. It's the runt of the 4 saws so I don't expect much. Honestly I didn't see much difference in the 3 saws but the Dolly probably did the best but it's the only one with 3/8 chain . The 028's has new piston, rings and base gasket delete so it does real good for what it is but it's my ugly duckling.
Shoot, get out there and have fun bang, no matter how long it takes to cut something with that 028 wb!
I promise you I'll enjoy it no matter how or if it cuts. I sat on a round about 15 minutes when it got too dark to cut and just enjoyed the nice temperature and the outdoors.
