Quadra fire 1200 newbie

Here's the thing, even if you need to replace a bunch of stuff, you got it cheap enough. As long as the stoves heat exchange tubes and fire box don't have anything wrong with them you'll have a good solid stove.

 

Do u know slvblkk around prices for that stuff

Sent from my SM-S820L using Tapatalk

 

Ok.

Sent from my SM-S820L using Tapatalk

 

It does blow when we turn it on

Sent from my SM-S820L using Tapatalk

 

Ok, that is really good then. I mean literally WORST CASE scenario if you have to buy major components:

control board - $175
convection fan - $180
combustion blower - $80
misc. gaskets - $100 ish
door glass - $ ???

You'd still be in good shape and have a solid stove provided everything else is good with it.

 

It should run for 15 minutes or so after you plug it in.

 

We just plugged it in then unplugged it

Sent from my SM-S820L using Tapatalk

 

Don't have a thermostat yet. So the igniter is bad then

Sent from my SM-S820L using Tapatalk

 

That looks bad ?

Sent from my SM-S820L using Tapatalk

 

This is the door

Sent from my SM-S820L using Tapatalk

 

Not necessarily but for $30 I'd just replace it unless you know when it was replaced last.

 

Ok thanks .I found one on Amazon


Sent from my SM-S820L using Tapatalk

 

I'm just overwhelmed

Sent from my SM-S820L using Tapatalk

 

That's not too bad, it just looks like surface rust. Elbow grease and a little paint it'll look like a million bucks. Although the paint in the firebox will burn off after the first fire but it'll look nice until then.

 

Which glass pane is broken?

 

Could we get a cover for now. We are short on cash

Sent from my SM-S820L using Tapatalk

 

Middle piece

Sent from my SM-S820L using Tapatalk

 

300 Watt Loop Igniter Upgrade fits Quadra-Fire SRV7000-647 / AMP-300W ALL 18 - Direct Igniter

Even with shipping it's like $30

 

I'm pretty cheap so I definitely price shop everything and get it prom the cheapest sourced place.

 

A cover?