What's up today (bullchiting) thread.

That's a nice area. I was up there a couple months ago...didn't get to do much since I was working but it seemed pretty laid back.

 

I'm 10 minutes south of Lake Geneva. Real laid back down here.

 

Good (better) for you and congratulations!

 

Thank you. Very glad I got outta there!

 

I did an oil change on the chipper and the 20 ton splitter along with cleaning the filters out with some air. The chipper also received a good lube job. Depending on the weather, the chipper should see some action on Thursday. I'll be using the chips to level out our stacking area.

 

Finally reassembled the old family church pew that I had started refinishing last Nov/Dec! Also, hung a couple cabinets; a rack free standing wall shelves' also moved the wood lathe to where I think it'll stay now. Band saw ha yet to find it's permanent spot.
Garage is looking good for winter!

 

Got a bunch o' stuff done at work today. Going to try to plant the fall garden tonight...been holding off since its been so dry but there's a good chance of rain on Thursday.

 

Hmmmm...big enough for two, no?

 

Went to the work shop this afternoon with the intention of starting to clean it. I got the corner sweep out where an old freezer was that I moved out yesterday. Pulled the air compressor to the space.
I had been thinking about making some sort of marker for logs. Had a 2x2 to move and thought that maybe it. Drilled 1/2" holes at 16'"s along the 2x2. Looked at the log pile and thought I would see how it works. Took spray paint and sprayed through the holes. It work fairly well, but I think I will make one out of a 1x4 and drill the holes 1".
Cut the first log and thought this fun. Cut up 3 more logs into rounds and moved to the splitting area. May split some of the rounds after supper.

 

Just one bit of advice for Mrs. Schlot's benefit.

Do not, I say again, DO NOT ride this way after Mexican food!!!

 

Yesterday I cleaned the stove pipes on both the wood and pellet stoves so we're ready for the burning season. The pellet stove pipe had less in it because we burned less because of the warm winter and the wood stove had the same amount of ash compared to previous years.

I might change the door gasket on the wood stove but I'll check it again before I do that.

 

Lake Geneva, just a little nicer than chiraq.

 

Hey jackwagon, did you get your bid submitted? No?! WHY NOT??
What do you mean Vulcraft made a mistake and omitted a sizable portion of material.
Your detailer can't complete the entire portion of the project in the scheduled timeframe? C'mon.
Whaaaa?? several details don't work? And you know this how? **

** 'cause I'm working with the same firm and I changed all dat chit to work and they approved it for construction.
Pretty sad when I start typing to myself. I do submit in the morning, job only grew by 6 figures or so. G-night all.

 

Glad to hear that. Congrats and good job.

 

Getting my hernia fixed today! I won't able to lift more than 20lbs for the next month.

It's amazing how simple they've made operations these days. A few little cuts and that's all. I remember my grandparents having operations and they would be in the hospital for a week or more.