Fahrenheit Technologies Endurance 50F Information

Went out to Tjim01 place today and checked out his setup as well as fixing the gasket issue on his ash pan and firebox door. We also preformed the mods to the burnpot and I suggested a few other items to check/preform while he is getting it back together.

With him only being about 25 minutes away, I'll go back once he has the stove back together and check out how all the new parts and mods are working!

He truly has a beautiful home and piece of property!

Thanks for having me! It was nice to meet you and your son!

 

Hot air only. But they are great units.

I love mine and we have 11 members here with the same unit. That's a record as far as Pellet furnaces go (same brand) for any Forum.

 

He had two pot assemblies (2nd Gen which is older than mine but still an updated version for yours). I'm not sure if this will fit in the cradle/receptacle on your generation stove? I only picked up the one to try in my stove or have some stainless parts made.



The only part the pot was missing is the top burn plate. But the one I have will fit this style pot.

The pusher assembly and the arm guide assembly were brand new.

ivanhoe can you take a few pics with the pot pieces out and take some measurements of the cradle?

He also hado a new ignitor that I picked up for cheap ($50).


The other pot is the same style as this one. He didn't have any doors (with or without airwash flapper).

I'd gladly send this out to have someone look at fabbing stainless parts. If someone with a first generation stove wanted to try it (if receptacle will allow)? I'd ship it for you to try. You'd need to get a top burn plate. Unless my BIL chbryson has an old one he could bring to me the next time he is out this way?

 

The actual burn pot receptacle (once all your burn pot parts are out). A pic will help as well.

I plan on picking up my $400 Harman PF 100 pellet furnace is bought off of EBay next weekend.

My Fahrenheit may be for sale after the end of this season?

 

Yes, my BIL furnace has all the updated parts (pot, sail switch, exhaust blower, impeller, etc). I think the only part he is missing is the exhaust manifold

That's a great burn pattern! Still good airflow! Glad I could help! If you ever want me to come back out and have a few blue smoothies with you and look it over? Somersets should help the heat output a lot and you could probably close the air damper a little more to retain some more heat.

I just picked up a Harman PF 100 off of EBAY!! Not sure whether I will install it in the house and put the Fahrenheit in the garage? Or put the Harman in the garage? Or.....? But the Harman has a larger 3 speed distribution blower and it's 112,000 BTU! Pretty excited to get it. I just have to drive to WV to get it next weekend!

 

PM Don2222. He will be able to hook you up.

 

Not sure if you read that I got an extra pot assembly? If you wanted to use it as a guide to make some parts? I like my burn pot version. But I wish the bottom halves were one piece like this one. That would make it the best of both worlds.