Too many pellets

Still seems odd that the pellets fill the pot.

There should not be that many pellets in there.

 

Stove has been running nearly perfect all weekend.

Leave blower suck, shop vac blow, and rubber mallet did the trick.

Pellets fill to about 30% if it takes too long to light, more pellets start in.... just as it lights....it lights early enough now and just runs normally...98%...I even had to up the auger feed just a little.

Thanks for all the inputs.

 

It must try twice like mine before it says no go. A clean stove is a happy and safe stove.

You don't want to hear what has been suggested. It requires removing all electrical parts and pressurized hot water. Very messy.

 

rubber mallet!someone owes me a beer!

 

Lol Bob...next time you're in Central MA a beer it is.

Smokey....lol I was thinking of sand.

Profile 30 down stairs is next....on a vent (20 is to a chimney) so I'll be able to do it in place...and it has the clean-out openings

 

Thanks!A little bit of welding can put in some clean out ports!

 

The wood icky sticks loosen with hot or warm water, just super messy, on my roaster each side has a full length ash trap held on by one screw. Very easy to clean.

 

Hmmm..no water.....

I wonder if I could cut clean out openings and make covers.... the 20-2 has them.....