In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Turning on a 230vac thru wall AC unit with Lowes Iris?

Discussion in 'The DIY Room' started by don2222, Jun 17, 2016.

  1. don2222

    don2222

    Joined:
    Nov 10, 2013
    Messages:
    3,387
    Likes Received:
    4,738
    Location:
    Salem NH
    Hello

    With the hot weather fast approaching, I am looking for a very efficient thru the wall workshop air conditioner and 230 vac seems to be the way to go! LG makes a couple humming along at 230vac, so the current draw is half the 110vac units. However, here is the trick, will it work with the Lowe's Iris system so I can switch it on with my iPhone on the way back from a job?
    Since The only AC controls for Iris are 110vac and probably low current then a nice heavy duty relay with a 110vac coil is in order here?
    How about this Siemens big bruiser?
    https://www.amazon.com/gp/aw/d/B00GRKQ7PY?pc_redir=T1

    Here are the Home Depot LG Air Conditioners of interest?
    11,800 BTUs 230VAC
    LG Electronics 11,800 BTU 230-Volt Through-the-Wall Air Conditioner with ENERGY STAR and Remote LT1236CER at The Home Depot - Mobile
    13,000 BTUs 230vac
    LG Electronics 13,000 BTU 230-Volt Through-the-Wall Air Conditioner with Remote LT1433CNR at The Home Depot - Mobile

    So wil this baby do the trick??
    In other words, hook up the Lowe's 110 module to the cool and switch one hot leg of the 230VAC see? :)
    Click pic to enlarge
     

    Attached Files:

    bushpilot likes this.
  2. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,024
    Location:
    Greenville County SC
    I wonder if you could find something from a European company in 230V as that's the standard over there.
     
  3. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,024
    Location:
    Greenville County SC
    Ah, wait a second, I see what you're trying to do. Yeah, your contactor would do the trick but that's waaaay more contactor than you need. How big is the shop? Is this your shed/workshop? I think the ACs you are looking at are going to be too large as well. A smaller, well insulated shop would probably do just fine (if not better) with a 5-6k BTU unit.
     
  4. don2222

    don2222

    Joined:
    Nov 10, 2013
    Messages:
    3,387
    Likes Received:
    4,738
    Location:
    Salem NH
    Hello
    Thanks for helping me take a step back and really think about this first before plunging right in.

    It is not the shed, it is a new workshop I just built last summer.
    This new workshop is 22 x 12 = 264 sq ft under an open deck on the warmest south facing side of the house. It is 2x6 construction with a concrete floor and will be well insulated when the wiring is all done.
    The chart below seems to indicate a 5k or 6k air conditioner might be a tad small.
    Also there may be 2 peoples and it is sunny.
    Consumer Energy Center - Window Air Conditioners
     

    Attached Files:

    Last edited: Jun 17, 2016
  5. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,024
    Location:
    Greenville County SC
    An 8k would be more than enough and they are fairly easy to run on 120v if you needed. But you are just barely bigger than the spec for 6K and you didn't mention any French doors or picture windows so I'm guessing the space will be very energy efficient. Too much AC will not make the space all that comfortable. It will cool down too fast to de-humidify and that's where the comfort comes from. 5-6k could be tough to find in a through-wall model however. I've really only seen them as a window unit.
     
  6. Jack Straw

    Jack Straw

    Joined:
    Oct 3, 2013
    Messages:
    8,396
    Likes Received:
    52,392
    Location:
    30 miles west of Albany Ny
  7. don2222

    don2222

    Joined:
    Nov 10, 2013
    Messages:
    3,387
    Likes Received:
    4,738
    Location:
    Salem NH
    Yes, the amp draw is half (states that in your article) but the power consumption is the same. P = EI
    However the motor starts easier at the higher voltage so the 240 volt unit may last longer.
     
    Jack Straw likes this.
  8. don2222

    don2222

    Joined:
    Nov 10, 2013
    Messages:
    3,387
    Likes Received:
    4,738
    Location:
    Salem NH