In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Live from the PA GTG

Discussion in 'Chainsaws and Power Equipment' started by TurboDiesel, May 27, 2016.

Page 15 of 17
  1. cwn877

    cwn877

    Joined:
    Oct 4, 2013
    Messages:
    1,174
    Likes Received:
    4,542
    Location:
    Central Pa
    A lot of great pics definitive dave . I don't know what the hole is for in that bar if it where a longer bar I'd say a handle.
     
    cwn877, May 31, 2016
    #281 Top
    NH mountain man, Leadfarmer, HighCountry and 7 others like this.
  2. UncleJoe

    UncleJoe

    Joined:
    Feb 24, 2014
    Messages:
    1,467
    Likes Received:
    5,854
    Location:
    SC Pa
    Sorry. Only the band saw.

    I was walking around taking stills when everyone went down to the old mill so I was a few minutes behind. When I got there I took a few stills of that. The belt broke before I got any video.

    I can load 500MB a week at Vimeo. I have 130MB left to use this week. I have 4 clips of the mill running the poplar and walnut that come to 350MB so I'll load those Sunday and post them.

    Here is a random video that I had room for. The first minute or so is just panning around the area.

     
    Last edited: May 31, 2016
    UncleJoe, May 31, 2016
    #282 Top
    NH mountain man, Leadfarmer, ChipsFlyin and 9 others like this.
  3. definitive dave

    definitive dave

    Joined:
    Nov 1, 2015
    Messages:
    184
    Likes Received:
    1,168
    Location:
    Columbus, Ohio
    Short sawmill vid


    Short video of Brutus


    Scottys 051 throwin chips
     
    definitive dave, May 31, 2016
    #283 Top
    Leadfarmer, ChipsFlyin, unclefess and 10 others like this.
  4. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,019
    Location:
    Greenville County SC
    Another sawmil vid, right up until the fan belt gave up on us.

     
    MasterMech, May 31, 2016
    #284 Top
    NH mountain man, Leadfarmer, ChipsFlyin and 11 others like this.
  5. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    23,070
    Likes Received:
    147,421
    Location:
    NE Ohio
    Detroit powered sawmill...bet that thing will "walk n talk"!
     
    brenndatomu, May 31, 2016
    #285 Top
    NH mountain man, Leadfarmer, ChipsFlyin and 7 others like this.
  6. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,019
    Location:
    Greenville County SC
    It sounded great!
     
    MasterMech, May 31, 2016
    #286 Top
    NH mountain man, Duane(Pa), Leadfarmer and 7 others like this.
  7. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,631
    Location:
    Northeast Oh
    I have a short video of the bandsaw uploading now :)
     
    DexterDay, May 31, 2016
    #287 Top
    NH mountain man, ChipsFlyin, HighCountry and 4 others like this.
  8. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,631
    Location:
    Northeast Oh
     
    DexterDay, May 31, 2016
    #288 Top
    NH mountain man, Duane(Pa), Leadfarmer and 11 others like this.
  9. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    23,070
    Likes Received:
    147,421
    Location:
    NE Ohio
    I bet, nothing else like the sound of those old 2 stroke diesels BWAAAAAAAAAH!!!...some scary crap though if you've ever had one try to "run away" on you. Fortunately the only 1 or 2 that have ever tried it on me had the emergency intake blocking door thingy (don't wanna get too technical on y'alls :rofl: :lol:)
     
    brenndatomu, May 31, 2016
    #289 Top
    NH mountain man, Leadfarmer, definitive dave and 6 others like this.
  10. cwn877

    cwn877

    Joined:
    Oct 4, 2013
    Messages:
    1,174
    Likes Received:
    4,542
    Location:
    Central Pa
    It does make some noise. I have rebuilt numerous Detroits and have fixed a lot of blown up ones just by resetting the emergency flap that had been used to shut them off by mistake. I check that the flap on this ones works periodically.
     
    cwn877, May 31, 2016
    #290 Top
    NH mountain man, Duane(Pa), MasterMech and 8 others like this.
  11. Redfin

    Redfin

    Joined:
    Mar 1, 2015
    Messages:
    922
    Likes Received:
    4,268
    Location:
    central Pa
    You ever have one runout like that Chris?
     
    Redfin, Jun 1, 2016
    #291 Top
    Eric VW likes this.
  12. cwn877

    cwn877

    Joined:
    Oct 4, 2013
    Messages:
    1,174
    Likes Received:
    4,542
    Location:
    Central Pa
    No Jon I haven't but have fixed ones that did.
     
    cwn877, Jun 1, 2016
    #292 Top
    Eric VW likes this.
  13. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,019
    Location:
    Greenville County SC
    More sawmill action

     
    MasterMech, Jun 1, 2016
    #293 Top
    NH mountain man, Scotty Overkill, unclefess and 6 others like this.
  14. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,244
    Likes Received:
    60,315
    Location:
    Grand Blanc, MI,
    Talk about cutting like butter:thumbs:
     
    HDRock, Jun 1, 2016
    #294 Top
    NH mountain man, Scotty Overkill, Barcroftb and 2 others like this.
  15. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,631
    Location:
    Northeast Oh
    And he had some "tooth" issues with the blade, so cwn877 was "taking it slow"!!!

    That old Mill is amazing! Kudos to the whole family for putting up the demonstration!!
     
    DexterDay, Jun 1, 2016
    #295 Top
    NH mountain man, Scotty Overkill, Barcroftb and 5 others like this.
  16. cwn877

    cwn877

    Joined:
    Oct 4, 2013
    Messages:
    1,174
    Likes Received:
    4,542
    Location:
    Central Pa
    Hopefully Saturday everything will be fixed and I can get some run time on it.
     
    cwn877, Jun 1, 2016
    #296 Top
    Scotty Overkill, Barcroftb, ChipsFlyin and 6 others like this.
  17. NH mountain man

    NH mountain man

    Joined:
    Sep 28, 2015
    Messages:
    6,387
    Likes Received:
    37,594
    Location:
    WMNF N.H.
    That's exactly what I would say, a handle.
     
    NH mountain man, Jun 4, 2016
    #297 Top
  18. definitive dave

    definitive dave

    Joined:
    Nov 1, 2015
    Messages:
    184
    Likes Received:
    1,168
    Location:
    Columbus, Ohio
    I just realized I haven't seen any pics of Jon1270s saws, he had a really nice echo twin and a MS200 rear handle and some other fun stuff and towards the end he ran Joe's 075 in the big log like a pro.
    He had another saw laying there that I wanted to look up and read about but my feeble brain is overloaded and I cant remember what it was :(
     
    definitive dave, Jun 4, 2016
    #298 Top
    SquareFile likes this.
  19. Redfin

    Redfin

    Joined:
    Mar 1, 2015
    Messages:
    922
    Likes Received:
    4,268
    Location:
    central Pa
    There were a few saws I missed running. Got caught up b'ssin with buddies.
     
    Redfin, Jun 4, 2016
    #299 Top
    definitive dave, The Wood Wolverine and NH mountain man like this.
  20. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,019
    Location:
    Greenville County SC
    Bs'n was winning over running saws with all that heat!
     
    MasterMech, Jun 4, 2016
    #300 Top
    definitive dave, Leadfarmer, mike bayerl and 2 others like this.
Page 15 of 17