In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

The OL Husq 61 lives again

Discussion in 'Chainsaws and Power Equipment' started by HDRock, May 24, 2016.

Page 1 of 2
  1. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    Haven't used it in a while, got a muffler gasket because I found out there was no gasket on it, new air filter, clean it up a bit, put a little Sea Foam in the gas, sharpened the chain tuned it and it was rockin .
    Smoked a little bit at first from the sea foam,
    Idle is at 2500,, tuned high speed right at 12000, runs good right there cleans up in the cut.
    I don't have a compression gauge, when I bought it it was said to be 165

    20160524_185330.jpg

    20160524_190440.jpg

    20160524_185727.jpg

    Hard to get a perfect picture but, What do you think fellas piston looks pretty good ah?


    20160524_170215.jpg

    20160524_170219.jpg

    On the gasket. raised ridges on one side, do they go in toward the engine or out to the muffler or does it matter?
    I put the raised ridges toward the muffler.

    Other side
    20160524_171830.jpg

    Raised ridges
    20160524_171819.jpg


     
    Last edited: May 24, 2016
    HDRock, May 24, 2016
    #1 Top
    Chris F, Shawn Curry, thewoodlands and 7 others like this.
  2. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    Oops, changed 1200, to 12000
     
    HDRock, May 24, 2016
    #2 Top
    clemsonfor and Eric VW like this.
  3. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    24,401
    Likes Received:
    140,421
    Location:
    US
    Don't know about the gasket direction, but.....
    Run that Husky, HD!
    :saw:

    :thumbs:
     
    Eric VW, May 24, 2016
    #3 Top
    pantelis and HDRock like this.
  4. NH_Wood

    NH_Wood

    Joined:
    May 11, 2014
    Messages:
    1,265
    Likes Received:
    4,219
    Location:
    New Hampshire
    Nice! 61's are great saws - built like tanks and seem to just run and run. Glad you got her back in business! Cheers!
     
    NH_Wood, May 24, 2016
    #4 Top
    clemsonfor, HDRock and Eric VW like this.
  5. tamarack

    tamarack

    Joined:
    Mar 20, 2015
    Messages:
    1,328
    Likes Received:
    6,951
    Location:
    paulina oregon
    61 husky is a workhorse for sure. Tough to beat the 200 series huskys. I have a 266se that i really love.
     
    tamarack, May 25, 2016
    #5 Top
    clemsonfor and NH_Wood like this.
  6. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    :yes:That saw has got some torque :saw:
     
    HDRock, May 25, 2016
    #6 Top
    clemsonfor, NH_Wood and Eric VW like this.
  7. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,996
    Likes Received:
    37,474
    Location:
    Greenwood county SC
    I was thinking the ridges face it at first but it kind of makes more sense to face the muffler. My thinking is the muffler is not machined face like the CYL and the ridge will contour to any inperfection?

    So we're thinking the same and I think your good. Like you said many don't even have a gasket anymore like yours did
     
    clemsonfor, May 25, 2016
    #7 Top
    HDRock and Eric VW like this.
  8. dougand3

    dougand3

    Joined:
    Aug 6, 2015
    Messages:
    336
    Likes Received:
    1,224
    Location:
    North Alabama
    Piston looks pretty good. Very light scratches. May have been run a little lean at some point or just debris scratches. If it has good power in the cut, I doubt I'd pull cylinder to inspect further. As the ring wears, you get a bigger ring end gap - that lowers compression. Might need a new ring if power drops.
     
    dougand3, May 25, 2016
    #8 Top
    HDRock, pantelis and clemsonfor like this.
  9. pantelis

    pantelis

    Joined:
    Apr 21, 2015
    Messages:
    861
    Likes Received:
    1,384
    Location:
    Europe
    Today a friend leave me a husqvarna 61 gift newer edition now i am in rebuild phase
     
    pantelis, May 25, 2016
    #9 Top
    Shawn Curry, Eric VW, NH_Wood and 2 others like this.
  10. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    Yep, that's what I was thinking.
    As you can see by the carbon on the bottom, it was leaking there that's why I wanted to get a gasket on it.
    IPL shows a gasket on it and I got it from dealer
    I don't hear it the popping now when it's idling so I think it's not leaking now
     
    Last edited: May 25, 2016
    HDRock, May 25, 2016
    #10 Top
    Shawn Curry, Eric VW, dougand3 and 1 other person like this.
  11. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    It does have good power in the cut.
     
    HDRock, May 25, 2016
    #11 Top
    Eric VW and pantelis like this.
  12. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    I was thinking maybe there is a aftermarket Muffler out there I could put on it that would be better.
    Is there?

    It's just a stock Muffler with no mods
     
    HDRock, May 25, 2016
    #12 Top
    Eric VW likes this.
  13. pantelis

    pantelis

    Joined:
    Apr 21, 2015
    Messages:
    861
    Likes Received:
    1,384
    Location:
    Europe
    Very nice made saw , strong and simple construction , simple for repair if ..................................................need
     
    pantelis, May 25, 2016
    #13 Top
    Eric VW and HDRock like this.
  14. pantelis

    pantelis

    Joined:
    Apr 21, 2015
    Messages:
    861
    Likes Received:
    1,384
    Location:
    Europe
    Yes on ebay or amazon ,
     
    pantelis, May 25, 2016
    #14 Top
    Eric VW and clemsonfor like this.
  15. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    What would those be less restrictive than stock.
    I looked at some but I'm not sure what's what
    Would you show me an example?
     
    HDRock, May 25, 2016
    #15 Top
    Eric VW likes this.
  16. pantelis

    pantelis

    Joined:
    Apr 21, 2015
    Messages:
    861
    Likes Received:
    1,384
    Location:
    Europe
    you looking a super mufler ready and just put it on the saw ??
     
    pantelis, May 25, 2016
    #16 Top
    Eric VW, clemsonfor and HDRock like this.
  17. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    Ya, ready to put on
     
    HDRock, May 25, 2016
    #17 Top
    Eric VW, clemsonfor and pantelis like this.
  18. pantelis

    pantelis

    Joined:
    Apr 21, 2015
    Messages:
    861
    Likes Received:
    1,384
    Location:
    Europe
    Sorry you must made it no available in husky , ebay and others
     
    pantelis, May 25, 2016
    #18 Top
    Eric VW and HDRock like this.
  19. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,249
    Likes Received:
    60,361
    Location:
    Grand Blanc, MI,
    :( oh well, runs good as is
     
    HDRock, May 25, 2016
    #19 Top
    Eric VW likes this.
  20. pantelis

    pantelis

    Joined:
    Apr 21, 2015
    Messages:
    861
    Likes Received:
    1,384
    Location:
    Europe
    its not rocket science to make one , and if fail not the end of the world , just give it a try
     
    pantelis, May 25, 2016
    #20 Top
    Shawn Curry, Eric VW and HDRock like this.
Page 1 of 2