I just googled "brazed", if that is like heat and solder, no. It is threaded. Somehow when I threaded the hoses back on I did not have leaks either!
this copper tube is a permanent part of the faucet. brass theaded end is also part of the faucet. is the screen in the brass end where the chrome nut is being threaded up on in this pic? making the screen a permanent part of the faucet also?
Better pics, I have no jargon or terminology for this, except I do not see copper pipes......(?) This is from under the sink, cold water supply This is closer up on the ss/brass w screen/chrome or SS The clog was in the screen inside the brass (?) fitting, not in the chrome or the SS braided hose. I really hope this makes more sense, I know I am hard to understand. Yep, WWW has had 25 years of this from me
ww, I'm laughing too, but quietly in the background, and with you....not at you. You don't happen to know my wife, do you? Womanspeak needs some cipherin'. I'm gettin' gooder at that, and it's only taken me since '92. You folks carry on....I'll be over here with a smile on my face.
I put a new faucet in the kitchen when we moved here, and it started running real slow last year. I tried taking it apart, soaking it in vinegar, cleaning the screen, thinking it may be in the shutoff........... Decided to just try a new one (inexpensive, as we'll be redoing the kitchen at some point). Evidently, somewhere inside the old one was clogged, because the new one has great pressure. When in doubt, throw it out.
This would be TMI. If you start posting pics, because of the pic rule we have, I'm out. That's weird....I'm usually laughing at Eric.
I have a fairly new faucet in the kitchen and it will thump a couple times each time I turn it on. When it thumps the stream of water is interrupted at the same time. It runs wide open but I don't know what the thump is. I may be the pressure filling the hose to the sprayer but I really don't know. I guess I could call a plumber .....
