In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Barn skylights

Discussion in 'The DIY Room' started by trktrd, Jan 4, 2016.

  1. trktrd

    trktrd

    Joined:
    Jul 25, 2015
    Messages:
    94
    Likes Received:
    443
    Location:
    Arkansas
    Just finished replacing the skylights in my barn roof. A hail storm 2 weeks ago punched the old ones full of holes. I built the barn exactly 8 years ago and was surprised how brittle and yellow the lights had gotten when I pulled the old ones off. The new ones are Palram brand and are guaranteed for 10 years, but I have my doubts. Is this something I can expect to be replacing every ten years or so? Thought about replacing with metal, but I spend alot of time in there and it would be like a dungeon.

    moto_0195.jpg
     
    bogieb, schlot, Jack Straw and 2 others like this.
  2. Stinny

    Stinny

    Joined:
    Oct 29, 2013
    Messages:
    14,067
    Likes Received:
    60,253
    Location:
    western Maine
    The sun's UV rays really destroy any type of plastic sheeting and flexible tarps... including (we discovered) clear vinyl tarps. Older airplane wings and modern ultralight wings are victims of UV rays if they're not painted/treated with special chems to block the sun's effects. You might look into clear Lexan for skylights next time. 1/8" and 3/16" thick is common in the sign trade. Glass companies too.
     
  3. trktrd

    trktrd

    Joined:
    Jul 25, 2015
    Messages:
    94
    Likes Received:
    443
    Location:
    Arkansas
    The new ones I put on are polycarbonate. Same as my greenhouse is made of. The greenhouse sustained no hail damage so I am hoping the new skylights will perform the same (at least for a few years). Greenhouse is only 4 years old so time will tell.
     
    bogieb and Stinny like this.
  4. Stinny

    Stinny

    Joined:
    Oct 29, 2013
    Messages:
    14,067
    Likes Received:
    60,253
    Location:
    western Maine
    That's all Lexan is... polycarbonite. Should do the trick. Good luck.
     
    bogieb likes this.
  5. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    17,698
    Likes Received:
    115,259
    Location:
    Vermont
    I replaced the ones in my barn when the started to leak with the best polycarbonate one Lowe's sells.. no leaks after 6 years mine are 30 wide 10 feet long and got 6 of them .... cannot say how brittle but I put up clear ones and still pretty clear. About 30 bucks apiece ..
     
    milleo and Stinny like this.
  6. trktrd

    trktrd

    Joined:
    Jul 25, 2015
    Messages:
    94
    Likes Received:
    443
    Location:
    Arkansas
    At least I got it right the second time !
     
    bogieb, Canadian border VT and Stinny like this.
  7. FarmHand78

    FarmHand78

    Joined:
    Jan 10, 2015
    Messages:
    720
    Likes Received:
    2,895
    Location:
    South East Iowa
    I sell a lot it the polycarbonite panels for skylights, side lights and even have ridge caps available in it to have ridge lights. I try to steer customers away from skylights, they are most prone to leaks and breakage. We have also found on wider buildings (70 ft wide+) the ridge lights have issues with cracking around the screw holes. Side light is my preferred way to get natural light.

    But, the poly panels are tough stuff, I have one building that the roof steel was damage by large hail, but the ridge lights all survived.
     
    Stinny and bogieb like this.