No more than 10 minutes in one and about two hours in the other. One mod makes it "race" so I did what I thought would give me the most gains. Other mods were left out cause in my pea brain the gains would be minor.
It would take me 2 hrs to do all that tunneling and back of cutters alone on the race one. The one looks just like my round. See why only 10mins.
3 days left to get them in. Man some of these are sweet looking . If they cut as good as they look we be in trouble.
Sent mine off yesterday. Working six days didn't have much time to mess with it. Some dude much smarter than me convinced me to square it up. I'll be overjoyed if it beats an "off the roll" ps3. cutf4fun Don't eyeball mine too close, it's ugly as hell but hopefully it'll cut alright. First one I've converted from round to square. Kept thinking to myself "why the $!?& am I wrecking a perfectly good chain?"
It will be a great practice chain for you ! You can file it again after its return trip. Pay attention to the cut witness marks in each tooth and "read" your chain If you can do OK on the PS/PS3, you will do even better with .375 !
Bump for anyone overhear that missed it. The chains were run today. So get over to CRS with your popcorn and stopwatch.
Here are some of the results from the Race Chains. Results from 3000 FPS or as Mag Craft. Squarefile. 4.01 AWOL. 4.21 Concretegazer 4.31 3000 FPS 4.31 Mdavlee 4.38 Hedgegrow 4.57 1manband 5.24 Aclarke 5.54 Results from Gatekeeper. Squarefile 3.9 Awol 4.23 concretegrazer 4.25 3000fps 4.25 Squarefile ps3 4.3 not race, work round W and R was suppose to be W RD Mdavlee 4.35 Hedgerow 4.65 1manband 5.24 Aclarke 5.52
These would be some of the results for the Work Chains. 3000 FPS timing of Videos. Work chains Stock PS 5.07 Stock PS3 4.74 Squarefile Rd 4.31 Cut4fun Sq 4.39 Jmester Sq 4.49 Ch74 Rd 4.52 660Mag Sq 4.59 Concretegazer Sq 4.63 AWOL Sq 4.73 Moparmyway Sq 5.06 Jmester Rd 5.08 Cut4fun Rd 5.14 Rjames Sq 5.16 1manband Rd 5.24 Aclarke Sq 5.54 Skippysphins Sq 6.15 Alsmith Sq 6.97 Stockmac 370 semichisel 7.67 Concretegazer timing of videos. Work chains. Squarefile. 4.46 Cut4fun. 4.47 660mag. 4.64 Concretegrazer. 4.66 Ch74. 4.68 Jmester. Sq 4.74 Awol. 4.84 Mopar. Ps3 4.93 Rjames. 5.10 Mopar. 5.17 Cut4fun. Rd 5.17 Jmester. Rd. 5.33 Skippysphins. 6.4 Al smith. 7.08 Ps. 5.27 Ps3. 4.97
Different ends of the wood cants too. The stock chains were only ran when close to knots. Then cut off block with knots. So not the best wood area as used on chains sent it. PS PS3 use same cutters.
