In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Christmas Thread- Of the giving kind!

Discussion in 'Chainsaws and Power Equipment' started by DexterDay, Dec 14, 2015.

Page 1 of 9
  1. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,630
    Location:
    Northeast Oh
    So we did it here last year, and it is a common thread on other forums.

    It's the time of year to be "Giving". So any extra parts, saws, chains, or whatever it may be that you may not need, but someone else may. Offer them up if you have no use for them. Remember, one man's trash is another man's treasure.

    Also, please remember this is a Giving thread. Items are meant to be taken. So please take them if you can use them. But don't stock your parts bin for a project that you may work on 4 years from now :)

    I have a few things to start with..
    1450142791074.jpg


    A clutch drum/spur sprocket for 1125 series (036/360). It's a .325 spur with 8T.
    1450143096126.jpg

    A new impulse line for 1128 series (044/440/046/460). And any other it may fit (to lazy to look ;) )
    1450143066867.jpg

    A new intake boot and a used carb (no H adjustment. Low adj only) for the Stihl 021/023/025-MS 210/230/250
    1450142946726.jpg

    A used clutch (needs springs) for a MS 261 (I think? It's a 1121 part #. To lazy to go down and look at my 261 to see if it matches. See a common theme here :( )
    1450142869867.jpg

    And finally a brand new K & N filter ( and pre filter. It's a 50 mm that will fit the velocity stacks that SquareFile machined for the Stihl 044/440/046/460. It doesn't have the angle on the head, so the filter does kinda interfere with the Master control lever. Tiss the reason I never used it. Claimed
    1450143003140.jpg



    Merry Christmas from my family, to you and yours! !

    1450143231756.jpg
     
    Last edited: Dec 25, 2015
    DexterDay, Dec 14, 2015
    #1 Top
    Jack Straw, reelcrzy, basod and 21 others like this.
  2. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,996
    Likes Received:
    37,473
    Location:
    Greenwood county SC
    Love that tree. And thats some cool loot! Someone will be happy!
     
    clemsonfor, Dec 14, 2015
    #2 Top
    Chvymn99, DexterDay and Eric VW like this.
  3. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    A few items... First up, a vintage depth gauge still in the original package.

    image.jpg

    A couple of chains in the original package.

    image.jpg

    Two pairs of Fiskars pruners, one set needs the spring.

    image.jpg
     
    Guido Salvage, Dec 14, 2015
    #3 Top
    NYCountry, Chvymn99, Barcroftb and 3 others like this.
  4. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,996
    Likes Received:
    37,473
    Location:
    Greenwood county SC
    Dang Gary no one wants those fiskars do they?

    I was looking to buy a depth gauge. But I need a .030. Was on the phone with LCS today about adding one to my order.
     
    clemsonfor, Dec 14, 2015
    #4 Top
    DexterDay likes this.
  5. Guido Salvage

    Guido Salvage

    Joined:
    Oct 5, 2013
    Messages:
    1,735
    Likes Received:
    4,938
    Location:
    The heart of the Bluegrass
    I hope someone wants the Fiskars, I have 3 brand new pair and don't need these.
     
    Last edited: Dec 14, 2015
    Guido Salvage, Dec 14, 2015
    #5 Top
    Chvymn99, clemsonfor and DexterDay like this.
  6. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,630
    Location:
    Northeast Oh
    I have a pair of these myself. Great tool for those that do not have one. Love mine. It even came with a little sheath/holster to hold it in.
     
    DexterDay, Dec 14, 2015
    #6 Top
    clemsonfor likes this.
  7. dougand3

    dougand3

    Joined:
    Aug 6, 2015
    Messages:
    336
    Likes Received:
    1,224
    Location:
    North Alabama
    New Fuel line kit for 1990s and newer Poulans and Craftsmans (or is that Craftsmen???) . 2 screw mount purge bulb - if needed, I'll trade to snap in (usually 2005 and newer saws). Free shipping to lower 48.

    Poulan Fuel Kit Screw 900.jpg
     
    dougand3, Dec 14, 2015
    #7 Top
    cnice_37, Chvymn99, clemsonfor and 2 others like this.
  8. SquareFile

    SquareFile

    Joined:
    Aug 7, 2014
    Messages:
    1,838
    Likes Received:
    6,567
    Location:
    somewhere
    I'm low on spare parts, but I'll file a 60dl 3/8" chain. Oregon LGX only, thats not rocked. Lol. I'll pay return shipping
     
    SquareFile, Dec 14, 2015
    #8 Top
    cnice_37, Moparmyway, Chvymn99 and 3 others like this.
  9. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,849
    Location:
    The Mitten
    Perfect timing! Kept meaning to list this as karma in the classifieds but never got around to it.

    Timberline chain sharpener
    20151214_223952.jpg

    Someone, maybe it was MasterMech, on here or another site recommended a mod so it could be used on either side of the bar. This allows a visual on how the carbide bit is sitting on both sets of cutters. I used my DremEl but slipped and made a bit of a mess of it. Still works well though. 20151214_224016.jpg
    It comes with 5/32, 3/16, and 7/32 carbides the 5/32 is slightly damaged @ the tip but this doesn't effect the function of it. 20151214_224159.jpg

    Also comes with the case.

    20151214_224330.jpg

    I really like this sharpener but ultimately stuck with the 12 volt granberg because I'm a lazy SOB.
     
    Barcroftb, Dec 14, 2015
    #9 Top
    cnice_37, Gasifier, Moparmyway and 6 others like this.
  10. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,630
    Location:
    Northeast Oh
    :dex:


    :thumbs:
     
    DexterDay, Dec 14, 2015
    #10 Top
    Chvymn99 likes this.
  11. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,630
    Location:
    Northeast Oh
    Now this is a great tool for those that do not like to hand file!
     
    DexterDay, Dec 14, 2015
    #11 Top
    Moparmyway, Chvymn99, clemsonfor and 2 others like this.
  12. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,019
    Location:
    Greenville County SC
    Wow! I hope somebody snatches that one up! I've always wanted to try a Timberline out just to get some hands on time with one. But I'm not sure it would win out over my USG in the end.
     
    MasterMech, Dec 14, 2015
    #12 Top
    Moparmyway, Chvymn99, clemsonfor and 1 other person like this.
  13. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,849
    Location:
    The Mitten
    It's a great little sharpener. Probably as close to factory sharp as I'm likely to get. However, I found it tedious because you have to take small amounts off each cutter. Thus requiring multiple passes. It's also nearly useless if you have buggered a chain on rocks.
     
    Barcroftb, Dec 14, 2015
    #13 Top
    Moparmyway, Chvymn99, clemsonfor and 1 other person like this.
  14. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,849
    Location:
    The Mitten
    Must have been someone else who modded theirs. Your welcome to this one. Pass it on when your tired of it. Or keep it if you like it:D
     
    Barcroftb, Dec 14, 2015
    #14 Top
    Chvymn99 and clemsonfor like this.
  15. SquareFile

    SquareFile

    Joined:
    Aug 7, 2014
    Messages:
    1,838
    Likes Received:
    6,567
    Location:
    somewhere
    SquareFile, Dec 14, 2015
    #15 Top
    Chvymn99, clemsonfor, MasterMech and 1 other person like this.
  16. Adirondackstihl

    Adirondackstihl

    Joined:
    Sep 16, 2014
    Messages:
    113
    Likes Received:
    440
    Id be interested in the Timberline

    I have a NOS 044 top cover to add
     
    Adirondackstihl, Dec 14, 2015
    #16 Top
    basod, cus_deluxe, cgraham1 and 4 others like this.
  17. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,849
    Location:
    The Mitten
    Shucks, just paying it forward. Hopefully someone will get some good use out of it.
     
    Barcroftb, Dec 14, 2015
    #17 Top
    Chvymn99 and clemsonfor like this.
  18. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,076
    Likes Received:
    17,849
    Location:
    The Mitten
    Sold to the highest bidder!:thumbs: pm me your info and I will drop it in a flat rate box in the morning.
     
    Barcroftb, Dec 14, 2015
    #18 Top
    cnice_37, Chvymn99, Stihl Livin and 3 others like this.
  19. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,019
    Location:
    Greenville County SC
    Tempting (very...) but I'd rather see someone get this that needs it. I'll scratch that itch another day! :yes:
     
    MasterMech, Dec 14, 2015
    #19 Top
    Chvymn99, clemsonfor and Barcroftb like this.
  20. SquareFile

    SquareFile

    Joined:
    Aug 7, 2014
    Messages:
    1,838
    Likes Received:
    6,567
    Location:
    somewhere
    Aww crap. As much as I'd like it the rest of my pos is not worthy. Lol.
     
    SquareFile, Dec 14, 2015
    #20 Top
    DexterDay, cus_deluxe, Chvymn99 and 1 other person like this.
Page 1 of 9