In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

70cc Shootout....

Discussion in 'Chainsaws and Power Equipment' started by Chvymn99, Jul 20, 2015.

Page 1 of 2
  1. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    I was going to do this this weekend, but just never got around to it... But I felt good enough after work tonight to get this done. These all were done on a 20" bar with a 7 pin on a fresh cut piece of Ash (that was found on the side of the road on Friday night :D). They are in order of running too. The 044 10 mm is a little tight yet, need to tweak it in a bit more and get some more trigger time with it. But it I do like the way it feels in the hands. I was kinda of shocked on how well the 046 stocked stood on its own. But the other two are just fun to run and make the :Dcome out.... Enjoy! Cause I did...:thumbs:


    044 10mm


    046 Stock


    046 MMWS


    044/46
     
    Chvymn99, Jul 20, 2015
    #1 Top
    Pallet Pete, Canadian border VT, man of stihl and 19 others like this.
  2. foragefarmer

    foragefarmer

    Joined:
    Oct 3, 2013
    Messages:
    1,479
    Likes Received:
    4,567
    Location:
    Central, Virginia
    Nice work Chevy. :)
     
    foragefarmer, Jul 20, 2015
    #2 Top
    Bert, HoneyFuzz, DexterDay and 1 other person like this.
  3. cgraham1

    cgraham1

    Joined:
    Sep 3, 2014
    Messages:
    840
    Likes Received:
    3,210
    Location:
    Nor Cal
    You call that a 70cc shoot out? Where's the 372xp, and Dolmar 7900? :p
     
    cgraham1, Jul 20, 2015
    #3 Top
    cus_deluxe, Canadian border VT, jon1212 and 10 others like this.
  4. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,632
    Location:
    Northeast Oh
    Nice line up there!!!

    All of them got better as they warmed up and blew out excess oil. A couple more cuts and the true beast would have come out of all of them!!
     
    DexterDay, Jul 20, 2015
    #4 Top
    Canadian border VT, man of stihl, clemsonfor and 6 others like this.
  5. Deacon

    Deacon

    Joined:
    Oct 9, 2014
    Messages:
    304
    Likes Received:
    1,615
    Location:
    Eastern Nebr.
    Nice work!
    Glad to see that I am not the only guy that does some light cutting while enjoying a fine cigar.
    Maduro?
    :sherlock:
    We need a cigar smoking avatar!
     
    Deacon, Jul 20, 2015
    #5 Top
    Shawn Curry, Bert, DexterDay and 2 others like this.
  6. concretegrazer

    concretegrazer

    Joined:
    Oct 3, 2013
    Messages:
    4,429
    Likes Received:
    12,454
    Location:
    Southwest MO
    Some good runners there. cigar-smoker.gif
     
    concretegrazer, Jul 20, 2015
    #6 Top
    clemsonfor, Chvymn99, Bert and 1 other person like this.
  7. firecracker_77

    firecracker_77

    Joined:
    Oct 4, 2013
    Messages:
    2,481
    Likes Received:
    3,605
    Location:
    IL
    those cookies look pretty tasty...hopefully those get used as kindling. ash cut that thin will season pretty quick
     
    firecracker_77, Jul 20, 2015
    #7 Top
    clemsonfor, Deacon, Shawn Curry and 2 others like this.
  8. HoneyFuzz

    HoneyFuzz

    Joined:
    Jan 20, 2014
    Messages:
    4,484
    Likes Received:
    14,831
    Location:
    Northeast , Ohio
    I always love watching your vids ! Nice work buddy !!!
     
    HoneyFuzz, Jul 20, 2015
    #8 Top
    concretegrazer, Shawn Curry, Chvymn99 and 1 other person like this.
  9. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,380
    Likes Received:
    10,479
    Nice videos. Sounds like the 10mm was still a little rich there. The pipes have a different tone than the others.
     
    mdavlee, Jul 21, 2015
    #9 Top
    man of stihl, clemsonfor, concretegrazer and 1 other person like this.
  10. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    Thank you :yes:

    :faint:...I guess I should have said a 70cc invitational only Shoot out...:whistle:...Those invitations were sent... I swear they were...:D
     
    Chvymn99, Jul 21, 2015
    #10 Top
    Pallet Pete, MasterMech, maulhead and 4 others like this.
  11. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    :yes:...Yes you are correct...
     
    Chvymn99, Jul 21, 2015
    #11 Top
    mdavlee likes this.
  12. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    Thanks... That was a Maduro Nub...It was a Monday and needed some relaxation after chasing electrical issues on a press yesterday.

    Thank you Concrete, and great Smiley find! Here you go Deacon .... (Grizzly Adam can you add View attachment 62185 )
     
    Chvymn99, Jul 21, 2015
    #12 Top
    concretegrazer, Deacon, Shawn Curry and 1 other person like this.
  13. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    Yes, they will go into the outdoor fire pit. :yes:

    Thank you, Sir! Its always fun, just glad you all enjoy them!:thumbs: .... Glad to see you back around here...:handshake:
     
    Chvymn99, Jul 21, 2015
    #13 Top
    clemsonfor, concretegrazer, Shawn Curry and 1 other person like this.
  14. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    Yea, she's running a bit rich. I haven't got to tweak her in yet (she was running around 12k), thats the longest I've ran her so far. The o' fresh paint on the muffler finally got warm enough to smoke off a bit.
     
    Chvymn99, Jul 21, 2015
    #14 Top
    clemsonfor and mdavlee like this.
  15. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    24,403
    Likes Received:
    140,445
    Location:
    US
    Saws, cookie cuttin, and a stogie- you had some fun for sure, Chvymn99 !!!
    Nice runners, gooder camera angle too!
    That MMWS was the chit!
     
    Eric VW, Jul 21, 2015
    #15 Top
    clemsonfor, concretegrazer and Chvymn99 like this.
  16. cnice_37

    cnice_37

    Joined:
    Oct 4, 2013
    Messages:
    3,205
    Likes Received:
    14,198
    Location:
    SE Mass
    I still don't understand how you don't get the smoke back in your eyes.... seasoned vet?

    Nice saws as always.
     
    cnice_37, Jul 21, 2015
    #16 Top
    clemsonfor, Eric VW and Chvymn99 like this.
  17. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    Oh, some times it does :whistle:...
     
    Chvymn99, Jul 21, 2015
    #17 Top
    Deacon, clemsonfor and Eric VW like this.
  18. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,817
    Likes Received:
    109,358
    Location:
    KC Metro
    Yes, that 046MMWS sure can run. Yes, the camera angle... The other half bought a flip camera about 3 or 4 years, I just found it the other weekend while cleaning.... It and it's little tripod work out gooder.... :thumbs:
     
    Chvymn99, Jul 21, 2015
    #18 Top
    mdavlee and Eric VW like this.
  19. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,380
    Likes Received:
    10,479
    It will be a bit different at 14k or so.
     
    mdavlee, Jul 21, 2015
    #19 Top
    Moparmyway, DexterDay, foragefarmer and 2 others like this.
  20. jon1212

    jon1212

    Joined:
    Oct 18, 2014
    Messages:
    372
    Likes Received:
    1,399
    Location:
    Utah........ugh!
    LOL! Clint, you know where the 372, and 7900 were. Out doing real woodcutting, as that is what they are built for, and I can guarantee they weren't cutting through some roadside branch.
     
    jon1212, Jul 21, 2015
    #20 Top
    DexterDay, cgraham1 and Chvymn99 like this.
Page 1 of 2