MillerModSaws and the PS-7910

Some saws area more forgiving on numbers for exhaust and transfers. I've done them on both ends of the numbers. Matt has one that is way different than the numbers in This one.

 

Got a 28" and a 36"..
Your pick..

 

I'll probably bring the 5 cube mutt along..

 

That would be worth the trip alone .............. 3 ported 80cc saws, which one takes the crown ?

 

The 064....
The mutt wears a 20" bar and 8 pin.. Not sure what it would do with a big bar on it. Probably ok I'd guess...
It sure makes quick work of a 14" cant...

 

I'd like to see it with a 28-32" on it.

 

My bad ............ I thought the mutt was the 7900

 

Thats what I have. Lol. Both of mine are stihl .063 guage but I already test fit and made an adapter for them. Lol

 

I've never thought to get a 32"...
I'll leave the 36 on the 9010 then..
28 is parked on the 064, but I got one of Homelite Mike's adapters..
Looks like we may get snowed on tomorrow.

 

It is...
It's a Dolstivarna 7900....

 

That's what I would want to see, your ported 7900 and Millers ported 7910's side by side by side ...........................

 

Is Workshop going? I have a 32" & a red saw that would be fun to throw into the mix.

 

No. He's on call this weekend...
He don't miss very many!

 

Well there go's that. Looks like the snow is moving in earlier than expected here. Stay safe travelers.

 

How did they run?

 

I think they went over well hopefully hedgerow will come put his thoughts in. They will pull a 32" bar while I think the 24 or 28 is more suiting. But this guy needs chain sharpening lessons. Lol. Dull chains make for a crappy ported saw. Lol.

 

Both ran as they should.
Both had that good throttle response.
Both pulled hard and held rpm while I pryed the 30" bar through chunks and stobbs of locust...
They never whimpered a bit..
Version 1 was my favorite..

Ugh... Dull chains...
I showed up to the cut with 4 sharps..
Left the cut with zero...
Lotsa stuff in the bark and crotch pieces.. Then there was the trailer...
Lol...

 

Thank you hedgerow. And thanks for letting me run that beast of a saw you call the 7900 dolstivarna.

 

That and dirt allways spells DEATH to a good chain !!

 

Was "version 1" the first ported one, or the second ported one ?
I don't want to assume ..........

..................... oh - and by the way, I have $200 saved up already for the trip to 64479. I really hope for the "recipe" to be perfected by your talented hands, if its not already !