In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Short term impressions of UJ Southern Hardwoods...

Discussion in 'The Pellet Bag' started by krooser, Nov 12, 2013.

  1. krooser

    krooser

    Joined:
    Oct 21, 2013
    Messages:
    924
    Likes Received:
    2,846
    Location:
    Waupaca, WI
    OK…. so I'm now burning Uncle Jed's Cold Remedy "Southern Hardwoods" in both of my stoves… house and shop. I made a deal with my local dealer and swapped my St. Croix Greenfield corn stove for enough pellets to get me through the winter… almost.

    First impressions
    … very nice. Good heat last night… it was 15F this morning. Ran the St. Croix Pepin on #3 all night. The living room was a comfy 74F… upstairs maybe 68F. Good sleeping temp.

    This afternoon I loaded the Englander with pellets and turned it on 5/5
    … the shop temp was 28F when I started. Tonite at 10PM it was 50F… and climbing. I have it idling now at 3/5

    I noticed the ash from these pellets is very light and fluffy. And not a lot of it I might say
    … overall they seem pretty good.

    My go to pellets have been Doug Firs
    … last year I didn't use the stove a whole lot so I bought quite a few bags of Marth softwoods at my local Farm and Barn store… these pellets are a step ahead of them and a whole world away from Marth's ashy hardwoods (which my dealer bags himself and sell as "Northern Hardwoods"…

    Overall I like 'em.
     
    jtakeman, smoke show and imacman like this.
  2. smoke show

    smoke show

    Joined:
    Oct 4, 2013
    Messages:
    2,983
    Likes Received:
    13,948
    Location:
    Pittsfield, Wi
    Do you know what brand pellet they are?
     
  3. krooser

    krooser

    Joined:
    Oct 21, 2013
    Messages:
    924
    Likes Received:
    2,846
    Location:
    Waupaca, WI
    I believe they are from Henry County Pellets… Paris, TN. ESES sold these a few years ago… I tried a few bags and they worked good.
     
    imacman, jtakeman and smoke show like this.
  4. krooser

    krooser

    Joined:
    Oct 21, 2013
    Messages:
    924
    Likes Received:
    2,846
    Location:
    Waupaca, WI
    Still working good. I noticed there are a few more fines in theses bags than I'm used to compared to the usual private label pellets from Earth Sense Energy Systems(local dealer). I know now that these pellets are not bagged by ESES but are trucked in from the pellet mill. No problem… just a bit dustier than I am used to… I still like these so if you see 'em here in the midwest buy 'em.
     
    gbreda, imacman and smoke show like this.
  5. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,637
    Location:
    Northeast Oh
    I ordered some paint from ESES. . They packaged the paint in this... What a tease. Considering I can't find these near me...

    20131113_164852.jpg
     
  6. krooser

    krooser

    Joined:
    Oct 21, 2013
    Messages:
    924
    Likes Received:
    2,846
    Location:
    Waupaca, WI
    b*stards….
     
    eatonpcat likes this.
  7. subsailor

    subsailor

    Joined:
    Oct 17, 2013
    Messages:
    3,693
    Likes Received:
    14,973
    Location:
    Winthrop, Maine
    I think that is the best named pellet made.
     
    will711 and eatonpcat like this.
  8. smoke show

    smoke show

    Joined:
    Oct 4, 2013
    Messages:
    2,983
    Likes Received:
    13,948
    Location:
    Pittsfield, Wi
    they double as a suppository to remedy the common cold. Allegedly. :eek:
     
    eatonpcat, subsailor and slvrblkk like this.
  9. jtakeman

    jtakeman Moderator

    Joined:
    Oct 4, 2013
    Messages:
    12,310
    Likes Received:
    55,497
    Location:
    NW CT foothills
    TMI smoke! :zip:
     
    eatonpcat likes this.
  10. krooser

    krooser

    Joined:
    Oct 21, 2013
    Messages:
    924
    Likes Received:
    2,846
    Location:
    Waupaca, WI
    I was sort of disappointed with the heat coming from my St Croix since the weather turned and the living room had a cold draft. Turns out the ceiling fan was running the wrong direction. Flipped the switch and BINGO! no mo' draft… lots of heat.
     
    DexterDay likes this.
  11. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,631
    Likes Received:
    27,520
    Location:
    Denver, NC
    Thanks for the reminder bud. :)
     
  12. Woodporn

    Woodporn

    Joined:
    Oct 4, 2013
    Messages:
    807
    Likes Received:
    2,090
    Location:
    S. MA
    I've never in my 15+ years of installing fans understood why air direction makes a differenence in the average home, unless the roon is absolutely massive that is.

    up the center and down the walls / down the center and up the walls.....all the air in most rooms just gets completely circulated.
    I can see how it would make a difference in a wharehouse or in a 2 story stairway, cathedral ceilings etc.
    The average home's rooms are not big enough for stratification...
     
  13. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,631
    Likes Received:
    27,520
    Location:
    Denver, NC
    Bingo
     
  14. krooser

    krooser

    Joined:
    Oct 21, 2013
    Messages:
    924
    Likes Received:
    2,846
    Location:
    Waupaca, WI
    We have a 4' open staircase in our living room. The stove is in the living room. When the fan pulls the air UP it sucks the cooler air from the kitchen (open floor plan) and sends it up the stairs.

    When the fan pushes the air DOWN the draft from the kitchen is greatly reduced… the differences in the two settings is remarkable in our house. One keeps a small area close to the stove @ 76F. The other keeps the LR 73-74F but also warms the kitchen.

    I have another fan at the top of the staircase… not currently running. When I DO have it in operation the second floor rooms can be warm or cool depending on the direction I have the fan set.

    Before we did a major remodel/insulation refurb three years ago (including opening the floor plan and installing the open staircase) things were different… the fans didn't seem to do much.
     
  15. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,676
    Likes Received:
    19,107
    I only have like 7 foot ceilings and there is a significant difference in temps if I don't have my ceiling fan on. My furnace thermostat is shoulder height and my pellet stove thermostat is about 2.5 feet from the floor. With the ceiling fan on the temps are identical, with it off there is about a three to four degree difference. The thermostats are about 15 feet away from each other. I am not sure direction makes a difference besides wind chill
     
  16. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,631
    Likes Received:
    27,520
    Location:
    Denver, NC
    Just curious....why so low? Shoulder height (5' from floor) is "normal".
     
  17. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,676
    Likes Received:
    19,107
    Its definitely not ideal....I have a crawlspace basement so running it through the floor and up the wall is not an option.(basement has only about a foot of clearance where the stove is) . Having the wire exposed is an eyesore for the Misses so I put it in a place as far and as high as I could without a fight.

    A wireless stat would be sweet but they are costly :(
     
  18. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,637
    Location:
    Northeast Oh
    I used one of the plastic wire routers that sticks to the wall. Painted it to match :) Works for me and the lady didn't mind it much

    IHP- What type of stat do you have (Lux?)?

    20130925_194240.jpg
     
  19. IHATEPROPANE

    IHATEPROPANE

    Joined:
    Oct 13, 2013
    Messages:
    4,676
    Likes Received:
    19,107
    It is a Hunter
     
  20. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,637
    Location:
    Northeast Oh
    Nice. That's what is in my pic also. It's there touch screen model. Works well, but the swing only goes up to 3° on this model.