In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Wood smell in house

Discussion in 'Modern EPA Stoves and Fireplaces' started by Well Seasoned, Oct 26, 2014.

  1. jetjr

    jetjr

    Joined:
    Feb 24, 2014
    Messages:
    3,233
    Likes Received:
    8,948
    Location:
    Pa/Md line
    This is the first time I really recall smelling it. If it keeps happening I may get a handheld CO2 detector like was mentioned earlier by Certified106.
     
    wildwest and Stinny like this.
  2. DutchFire

    DutchFire

    Joined:
    Nov 7, 2014
    Messages:
    68
    Likes Received:
    263
    Location:
    Delft, The Netherlands, Europe
    I only ever experience problems with smoke when starting up and when
    A) there is a downdraft due to the mentioned temperature difference
    B) when the cooking hood/extractor is on

    As soon as the fire becomes substantial these effects are gone. However, I fully recommend any burner to install a good CO detector, it only has to go wrong once...
     
    wildwest, Stinny and jetjr like this.
  3. Certified106

    Certified106

    Joined:
    Oct 17, 2013
    Messages:
    4,172
    Likes Received:
    11,911
    Location:
    In The Hills
    From what you describe it may not be CO leaking out of the stove as much as it may be smoke hanging around the house and making it's way back in. Anyhow I have the older version of this CO Meter which jmay be overkill for what you are needing. I use this meter for tracking down where the source of the CO is coming from. I can even pinpoint exactly where it is coming through a stove door gasket. They sell some cheaper versions that would be int he $130-$150 range if that helps you.
    http://www.valuetesters.com/hvac-he...-monoxide-analyzer-with-long-life-sensor.html
     
    wildwest and jetjr like this.
  4. DutchFire

    DutchFire

    Joined:
    Nov 7, 2014
    Messages:
    68
    Likes Received:
    263
    Location:
    Delft, The Netherlands, Europe
    Agreed, I have a simple $50 CO detector which is fixed to a wall and has a lifetime (10 year) battery. Pinpointing requires the advanced detectors.
     
    wildwest and jetjr like this.
  5. jetjr

    jetjr

    Joined:
    Feb 24, 2014
    Messages:
    3,233
    Likes Received:
    8,948
    Location:
    Pa/Md line
    I think you both may be right on. It was shortly after start up and a lot of "heavy" air. Most of my neighbors burn wood to so it may not have even been my smoke. I do have regular CO detectors both upstairs and down at the "correct" height as well as smoke detectors. No smell this morning so I think all is good. If it happens again I will look into a CO meter to pinpoint it.
     
    wildwest likes this.
  6. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,035
    Likes Received:
    83,752
    Location:
    N.H. WMNF
    It definitely happened here during warmer weather and a low pressure system coming through. Also when the flames go out, if I turned the stove down too low, the flames would puff ignite, then go out, puff ignite, then go out creating a strong pressure of smells. My stove is touchy, this seems to be the only real downside. Once it's dialed in perfectly, it's great.
     
    wildwest and Stinny like this.
  7. jetjr

    jetjr

    Joined:
    Feb 24, 2014
    Messages:
    3,233
    Likes Received:
    8,948
    Location:
    Pa/Md line
    Yea i had a "problem" start with this as well. Seems like whenever you think alright this will only be a few it never works out that way.
     
    wildwest and Well Seasoned like this.