What projects are on your bench?

working around the house today, trying to get the garage reorganization project rounded up.

late night project was hanging bars and chains up. I need more wall space.

I want to get my 064 back together, but can't find my flywheel puller since the move.. (needs seals). 064 and 12mm 044 on my bench (and will be for a few weeks).

 

I'm going to put a new set of powder coated spikes on the 064. I need to rotate the truck tires today also.

 

Pm me when you do. Seriously. I have a cylinder and a unemployed buddy that needs a bigger firewood saw than his ms170

 

Dex overlook my PM I sent right after your post above. If you can take care of Steve's buddy do that 1st.

 

Building some Hot Rod 359/357xp saws. Waiting on parts...

 

Got a 660 of an uncle's that he said just won't cut anymore. Only gave it a quick glance, but I suspect the problem is the bar that is worn to nearly twice the width of the cutters.

 

Square filed a little .404" chain for a comparison to 3/8" square filed.

 

357xp that needs case split, rebuild with new piston, 044 that I put together from scrounged parts, and a couple of 2152's that need cleaned up... One will be sold, one will get a 346 top end.
A couple of 028's... One for me and one to replace a buddy's that got run over (left).
And these two Huskys here... Both need cleaned up and fuel system work. Both have good compression and should be good runners from what I hear!

 

DexterDay I still have right of first refusal one one of these right? Been waiting patiently for you to name your price.

 

Sorry I don't have saw pics to post but they do cut for a living.

 

New fuel line and spark plug and this little guy purrs like an angry kitten !

 

Husqvarna 50. New oem top end on the way.

 

372 cylinder