In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Woodcart mods.

Discussion in 'Chainsaws and Power Equipment' started by Woodporn, Nov 21, 2014.

  1. Woodporn

    Woodporn

    Joined:
    Oct 4, 2013
    Messages:
    807
    Likes Received:
    2,090
    Location:
    S. MA
    So you've probably all seen this cart I built...

    https://flic.kr/p/dCVSZQ


    Well I got tired of trying to steer the cart (casters) with a few hundred pounds of splits in it. So.......I used a bit more red neck engineering, see below.

     
    Woodporn, Nov 21, 2014
    #1 Top
    basod, papadave, Chvymn99 and 1 other person like this.
  2. cnice_37

    cnice_37

    Joined:
    Oct 4, 2013
    Messages:
    3,205
    Likes Received:
    14,198
    Location:
    SE Mass
    I see the wheels a turnin'... but how? Can I get one in all orange?
     
    cnice_37, Nov 21, 2014
    #2 Top
    papadave and Chvymn99 like this.
  3. StickBender

    StickBender

    Joined:
    Oct 8, 2013
    Messages:
    408
    Likes Received:
    639
    Location:
    Ohio
    Snowblower I'm guessing?
     
    StickBender, Nov 21, 2014
    #3 Top
  4. cnice_37

    cnice_37

    Joined:
    Oct 4, 2013
    Messages:
    3,205
    Likes Received:
    14,198
    Location:
    SE Mass
    Definitely a snowblower... but the front wheels and the push of a button... window motor?
     
    cnice_37, Nov 21, 2014
    #4 Top
  5. Woodporn

    Woodporn

    Joined:
    Oct 4, 2013
    Messages:
    807
    Likes Received:
    2,090
    Location:
    S. MA
    2 casters from HF , I made an adjustable tie rod between the two and installed a 12v linear actuator with a reversing switch.

    Its a little slow to turn but makes life 100% easier
     
    Woodporn, Nov 21, 2014
    #5 Top
    papadave likes this.
  6. Woodporn

    Woodporn

    Joined:
    Oct 4, 2013
    Messages:
    807
    Likes Received:
    2,090
    Location:
    S. MA
    And yes the back half was a 9hp Ariens snow brush
     
    Woodporn, Nov 21, 2014
    #6 Top
    papadave likes this.
  7. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    20,820
    Likes Received:
    109,363
    Location:
    KC Metro
    Nice.... I've been trying to figure one out.... Looks like you've got a good design...:yes:
     
    Chvymn99, Nov 21, 2014
    #7 Top
  8. Woodporn

    Woodporn

    Joined:
    Oct 4, 2013
    Messages:
    807
    Likes Received:
    2,090
    Location:
    S. MA
    Woodporn, Nov 21, 2014
    #8 Top
  9. Freakingstang

    Freakingstang

    Joined:
    Nov 8, 2014
    Messages:
    929
    Likes Received:
    2,041
    Location:
    Ohio
    That's pretty slick dude! :cheers:

    I need one of those to climb stairs...sure beats my Pepsi Dolley up four stairs loaded to the gills
     
    Freakingstang, Nov 21, 2014
    #9 Top
  10. FredRed

    FredRed

    Joined:
    Aug 31, 2014
    Messages:
    196
    Likes Received:
    426
    Location:
    NW Connecticut
    That is kewl!
     
    FredRed, Nov 21, 2014
    #10 Top
  11. bigbarf48

    bigbarf48

    Joined:
    Sep 25, 2014
    Messages:
    2,344
    Likes Received:
    4,701
    Location:
    Stone Mountain, GA
    Slick system :smoke:
     
    bigbarf48, Nov 21, 2014
    #11 Top
  12. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,632
    Location:
    Northeast Oh
    Very nice! ! And I bet it's super helpful in the dead of winter! :dex:
     
    DexterDay, Nov 21, 2014
    #12 Top
  13. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,435
    Likes Received:
    103,369
    Location:
    St. Lawrence River Valley, NY
    Very good woodporn. I like that. Using the old noggin!
     
    Gasifier, Nov 21, 2014
    #13 Top