In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Well I cleaned out and fired up the pellet stove.

Discussion in 'Pellet Stoves, Pellet Fireplaces, Pellet Furnaces' started by swags, Nov 18, 2014.

  1. swags

    swags Moderator

    Joined:
    Oct 3, 2013
    Messages:
    4,455
    Likes Received:
    13,240
    Location:
    NE Ohio
    I am primarily a stick burner and didn't use the pellet stove too much last year but it was great. Just installed last winter and it was nice. It sits opposite side of the house from the wood stove so it's nice to balance out the house. I ordered a skid of pellets but didn't get them yet so I hadn't fired up the pellet stove. Then we get this crazy cold weather and my gas furnace croaks. We had the wood burner going but in a 2500sq ft house built in the 1800s it can't keep up on its own. Woke up to a house that was 50*. Brrrrr so I cleaned up the pellet stove while my wife ran to TSC to get a few bags to hold us over until the skid arrives. Fired her up 50/50 corn and pellets and she's rolling! With that and the wood stove going the house is slowly warming back up. American Wood Fibers any good? That's what TSC had.
    image.jpg image.jpg image.jpg
     
    NYCountry, slvrblkk, wildwest and 3 others like this.
  2. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    AWF are good, solid, middle of the road pellet....not the best, not the worst. I burned many tons.
     
  3. mithesaint

    mithesaint

    Joined:
    Jan 9, 2014
    Messages:
    534
    Likes Received:
    1,168
    Location:
    NW Ohio
    Solid pellet. I'd burn those all winter happily.

    My house was cold this morning too, except that my problem was that there were no pellets in the stove...I found the problem with the stove by looking in the mirror...:headbang:
     
  4. wildwest

    wildwest Moderator

    Joined:
    Jul 21, 2014
    Messages:
    30,633
    Likes Received:
    144,495
    Location:
    Coastal South carolina
    We have very similar set ups, pellet on this side of house, wood on other. Except no furnace. So far so good!
     
  5. will711

    will711

    Joined:
    Oct 4, 2013
    Messages:
    10,270
    Likes Received:
    50,828
    Location:
    Pocono Mts.
    Wood burner rocking in the Man Cave and the Harman rocking in the upstairs always nice to have backup :thumbs: glad it's working out for ya Swags :D:banana:
     
  6. swags

    swags Moderator

    Joined:
    Oct 3, 2013
    Messages:
    4,455
    Likes Received:
    13,240
    Location:
    NE Ohio
    Lol
     
    wildwest likes this.
  7. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,636
    Location:
    Northeast Oh
    Wood and Pellet combination is a sure fire winner!!

    As for the pellets? In our area? AWF, is a good pellet. Pro Pellet, Somersets, Presto-Logs, and American Wood Fiber are all good pellets around us. Those are our top 4 in my opinion. Not in that order either.
     
    wildwest and NYCountry like this.
  8. NYCountry

    NYCountry

    Joined:
    Sep 2, 2014
    Messages:
    2,687
    Likes Received:
    11,979
    Location:
    Mohegan Lake NY
    That's a nice set up you got there. Double the pleasure swags. Stay warm
     
  9. swags

    swags Moderator

    Joined:
    Oct 3, 2013
    Messages:
    4,455
    Likes Received:
    13,240
    Location:
    NE Ohio
    The skid I'm getting delivered is sommerset, and I just picked up a truck load off corn to mix in with it. Corn is cheaper and my stove was designed for corn. Been running good, that pellet stove throws an amazing amount of heat.
     
    slvrblkk likes this.
  10. imacman

    imacman

    Joined:
    Oct 23, 2013
    Messages:
    6,630
    Likes Received:
    27,517
    Location:
    Denver, NC
    Nice! That should be a good combo.....what % of each are you going to try?