Fond memories I'm sure. Folks are funny when they say the tree is "big" and when I see it in person a 20" bar will handle it with ease. I try not to have to break out the longer bars unless needed.
I think at the time the largest runner he had was wearing a 16". I cut the stem into roughly 7' sections, which his tractor was able to drag, barely. It wasn't too much longer after that he & I took a ride to the saw store to get him a 562. I was of course more than happy to break out my new 'big' saw at the time.
Reminds me of when I got my used 460 powerhead before I joined FHC. After using nothing but a 16" bar my whole life, I thought I was Paul Bunyon after I put a 28" bar on it. Later bought a 36" bar which I seldom break out.
24" is the largest I've yet needed. I got a 28 with hopes that buying one would ensure I'd never need it. So far so good.
With a bar that long you can buck some good size logs. I did a 41" oak round a couple years back with one.
It's not. That's Dad and Son. I'm like a sasquatch in that regard. There has been one pic of me posted here, not by me.
Appears operation was a success. Won't know if the lines all sealed well until I can put some of my fuel in it for a shakedown run. Then a spa day and photo shoot for sale. Like it never even happened®.
Ohiya, southern. Only the wolves left around here mostly as far as slungers go. Silver maples and Sycamores get huge but I don't cut on those unless forced. I only got the 28 in case I ever wanted to fall some of my own trees. Spurs/flare can easily add a foot or more to diameter when down close to the ground.
Stove maintenance. Everything got a once over and the stove got all new fire brick. Bucked some of the SBH. Gonna have a new 60cc brother soon. (A2 filter arrives wednesday) Went back to the SBH stump. Wondering if anyone thinks I left anything behind here? I think there might be one round in there that's not busted/punky/knotted? I checked it out when I took the two leaders off it and determined a losing ROI. SBH does you a favor and holds itself up off the ground via outer bark. I could hear the cutting pitch change when through the wood and back into bark. Here's a round rolled over. Note bottom bark uncut. (BBR likes to think he's showing off when he does this)
Being that I don’t cut Shagbark hickory often (it’s been about 3 years) I’d have tried to salvage something from what you left behind myself. But it wouldn’t have been fun to noodle the crotch section and work around the rot/splintered ends where it broke. I understand where you’re coming from. I used to save a lot more earlier in my hoarding career. Now I find myself pitching entire truck loads of cookies, shorts, and uglies into the woods. Not worth my time and aggravation.
The only valid one I see is below(above) the crotch. To cut *safely I'd have to drop the whole thing over. It's very hard for me to 'go the extra mile' when I got whole trees laying elsewhere I'm struggling to get to. I have probably 5x this much hickory albeit a bitternut that I'll be laying into soon. Yet another downhill blowover with an overhanging rootball. Unsure how far up the trunk I can go yet.
Is this just like the Coca Cola made in Mexico? My kid likes drinking that stuff, but if this is the same thing I’d prefer to buy the US version if I’m going to buy it at all.
Yep. Check the labels on glass bottles. At least some are now without the corn syrup. I have 1 to 2 cokes per week with particular meals.
Gonna have to give their maul a whirl. It is suspiciously Fiskars looking. They have a version of X27 also.