In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

The big push

Discussion in 'The Wood Pile' started by RCBS, Feb 6, 2023.

  1. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,252
    Likes Received:
    218,382
    Location:
    North Haven, Connecticut
    Fond memories I'm sure.

    Folks are funny when they say the tree is "big" and when I see it in person a 20" bar will handle it with ease. I try not to have to break out the longer bars unless needed.
     
    RCBS likes this.
  2. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    I think at the time the largest runner he had was wearing a 16". I cut the stem into roughly 7' sections, which his tractor was able to drag, barely. It wasn't too much longer after that he & I took a ride to the saw store to get him a 562. I was of course more than happy to break out my new 'big' saw at the time.
     
    buZZsaw BRAD likes this.
  3. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,252
    Likes Received:
    218,382
    Location:
    North Haven, Connecticut
    Reminds me of when I got my used 460 powerhead before I joined FHC. After using nothing but a 16" bar my whole life, I thought I was Paul Bunyon after I put a 28" bar on it. :saw: Later bought a 36" bar which I seldom break out.
     
    eatonpcat and RCBS like this.
  4. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    24" is the largest I've yet needed. I got a 28 with hopes that buying one would ensure I'd never need it. :thumbs: So far so good.
     
  5. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    My work was approved by the supervisor. He's grown now.

    upload_2026-11-3_9-47-40.png
     
  6. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,252
    Likes Received:
    218,382
    Location:
    North Haven, Connecticut
    With a bar that long you can buck some good size logs. I did a 41" oak round a couple years back with one.
    [​IMG]
     
    sms4life, Woodwidow, Nord and 2 others like this.
  7. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    35,252
    Likes Received:
    218,382
    Location:
    North Haven, Connecticut
    Is that you in the pic?
     
    eatonpcat and RCBS like this.
  8. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    It's not. That's Dad and Son. I'm like a sasquatch in that regard. There has been one pic of me posted here, not by me.
     
    eatonpcat and buZZsaw BRAD like this.
  9. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Tank swap today.

    upload_2026-11-4_7-29-45.png

    For the new Echo.

    upload_2026-11-4_7-30-11.png
     
  10. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Appears operation was a success. Won't know if the lines all sealed well until I can put some of my fuel in it for a shakedown run. Then a spa day and photo shoot for sale.

    upload_2026-11-4_9-15-3.png

    Like it never even happened®.

    upload_2026-11-4_9-15-23.png
     
  11. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Hecho en Estados Unidos.

    upload_2026-11-4_9-20-4.png

    No corn syrup!!!

    upload_2026-11-4_9-20-47.png
     
  12. Saw addicted farmer

    Saw addicted farmer

    Joined:
    Oct 6, 2026
    Messages:
    56
    Likes Received:
    451
    Location:
    Illinois
    Where are you located at? Here in Illinois dealing with tree service logs I regularly bury the 28in.
     
    eatonpcat and RCBS like this.
  13. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Ohiya, southern. Only the wolves left around here mostly as far as slungers go. Silver maples and Sycamores get huge but I don't cut on those unless forced. I only got the 28 in case I ever wanted to fall some of my own trees. Spurs/flare can easily add a foot or more to diameter when down close to the ground.
     
    eatonpcat likes this.
  14. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Stove maintenance. Everything got a once over and the stove got all new fire brick.

    upload_2026-11-9_6-43-1.png

    Bucked some of the SBH.

    upload_2026-11-9_6-43-45.png


    Gonna have a new 60cc brother soon. (A2 filter arrives wednesday)
    upload_2026-11-9_6-44-24.png

    Went back to the SBH stump. Wondering if anyone thinks I left anything behind here? I think there might be one round in there that's not busted/punky/knotted? I checked it out when I took the two leaders off it and determined a losing ROI.

    upload_2026-11-9_6-47-6.png

    upload_2026-11-9_6-47-31.png

    upload_2026-11-9_6-47-53.png

    SBH does you a favor and holds itself up off the ground via outer bark. I could hear the cutting pitch change when through the wood and back into bark. Here's a round rolled over. Note bottom bark uncut. (BBR likes to think he's showing off when he does this)

    upload_2026-11-9_6-49-42.png
     
    Woodwidow, EODMSgt, eatonpcat and 2 others like this.
  15. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,753
    Likes Received:
    69,614
    Location:
    Bristol, Connecticut
    Being that I don’t cut Shagbark hickory often (it’s been about 3 years) I’d have tried to salvage something from what you left behind myself. But it wouldn’t have been fun to noodle the crotch section and work around the rot/splintered ends where it broke. I understand where you’re coming from. I used to save a lot more earlier in my hoarding career. Now I find myself pitching entire truck loads of cookies, shorts, and uglies into the woods. Not worth my time and aggravation.
     
  16. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    The only valid one I see is below(above) the crotch. To cut *safely I'd have to drop the whole thing over. It's very hard for me to 'go the extra mile' when I got whole trees laying elsewhere I'm struggling to get to. I have probably 5x this much hickory albeit a bitternut that I'll be laying into soon. Yet another downhill blowover with an overhanging rootball. Unsure how far up the trunk I can go yet.
     
    EODMSgt, eatonpcat and Eric Wanderweg like this.
  17. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,753
    Likes Received:
    69,614
    Location:
    Bristol, Connecticut
    Is this just like the Coca Cola made in Mexico? My kid likes drinking that stuff, but if this is the same thing I’d prefer to buy the US version if I’m going to buy it at all.
     
    sms4life, eatonpcat and RCBS like this.
  18. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Yep. Check the labels on glass bottles. At least some are now without the corn syrup. I have 1 to 2 cokes per week with particular meals.

    upload_2026-11-9_8-17-37.png
     
    Eric Wanderweg and eatonpcat like this.
  19. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Gonna have to give their maul a whirl. It is suspiciously Fiskars looking. They have a version of X27 also.

    upload_2026-11-9_8-16-53.png

    upload_2026-11-9_8-18-59.png
     
  20. RCBS

    RCBS

    Joined:
    Jan 22, 2016
    Messages:
    6,610
    Likes Received:
    33,232
    Location:
    Over here
    Yoink!!!

    upload_2026-11-11_10-1-9.png
     
    eatonpcat and Eric Wanderweg like this.