A friend/customer of mine has decided to sell his 2005 Husqvarna 3120XP. Saw is not a shelf queen but is in very good shape for a 2005. He would like to get $750.00 PHO plus ship. PM if interested and I will forward the owner's contact info, you can then deal directly with the owner.
Mike it has the limited (green) coil on it, Walbro WT-7 carb (no HS adjustment), piston/cylinder look great, new kit in the carb, new fuel line and filter, new plug, everything works including the oil pump override.
Racers wont care about that coil or carb. My race 3120 had no H side. Cliff Helsel is a genius on how to get them to flow all the alky nitro you need through them without a H needle installed. 272 coil and fly retime. Sort of like autotune. I never had to adjust it for temp changes etc.
That can be done too. I may be trying to figure the coil change out on the 7900 here too. I have a big tilly that has the H in it already.
I saw somewhere that there is a WTA carb that is a direct bolt on, supposed to have both H&L adjustments. Can't remember where I saw that so don't take it for true.
Its only 25-35 to have a H put in the OEM carb. If you cant do it your self. Used to be 25 I know for sure. I think the new folks doing it now raised it to 35. Just like porting in 05-10 was 150. Then all of a sudden 12 it was 250 and 14 275-300.
I have not been able to contact Bill in a couple of days, so as far as I know it is still up for sale.
Bill was in hospital for a hernia operation, UUGH, no wonder he wasn't answering e-mail or calls. He and NWASAWMILL above are in negotation on the saw.
I have nothing to do with the sale, I just put potential buyer in contact with the seller. Bill (the seller) is a pro-cutter/arborist and ex-special forces. Good guy who does not run junk!