In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Free Applewood Wallingford CT

Discussion in 'The Wood Pile' started by Skier76, Nov 25, 2020.

  1. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Not much activity in the wood yard due to the deep snow. Cleared a path to the rack i'm filling and stacked what I split from last month. DSCF0589.JPG Still have the limb wood to buck which will top this off and start a fourth. Maybe I'll excavate that tomorrow. Three half cord racks filled plus over a quarter cord of nuggets and some pretty splits put aside for smoker wood bundles makes for around two cords from the score so far. Id like to get another cord but need the snow to melt to go back. Hopefully they haven't bulldozed yet. Any news on that Skier76?
     
  2. Skier76

    Skier76

    Joined:
    Dec 27, 2014
    Messages:
    3,077
    Likes Received:
    16,977
    Location:
    CT and SoVT
    Nice job Brad! No bulldozing yet. Looks like there are still a few more trees left when I drove by the other day. It does look like they have a tub grinder on the other side of the road from where the trees are tipped over. I’ll try and grab a pic next time I drive by. I do make it a point to drive by there every so often. LOL.
     
  3. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Thanks. I didn't know if you took that route often enough to see.

    Ill email them and ask. Ill assume once the snow is gone. ID like to get another three loads out of there.

    EDIT: just sent an email. They usually respond in a couple days.
     
    Last edited: Feb 7, 2026
  4. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Excavated the limb wood and bucked on Thursday. DSCF0590.JPG Topped off the rack. DSCF0592.JPG DSCF0593.JPG Nugget bin of apple filling up. DSCF0591.JPG
     
  5. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    29,379
    Likes Received:
    187,924
    Location:
    Country life, Ga
  6. Skier76

    Skier76

    Joined:
    Dec 27, 2014
    Messages:
    3,077
    Likes Received:
    16,977
    Location:
    CT and SoVT
    Awesome Brad! Keep us posted!
     
  7. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Update: I heard back. Once the snow is gone they will be getting to work on the trees. He did add that they will be pushing over two more rows of trees so if I don't get back I'll have those at least.
     
  8. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,501
    Likes Received:
    67,368
    Location:
    Bristol, Connecticut
    Thanks for the heads up. I've been wanting to get back down there for one more load but can't seem to make the time. Hopefully March is less busy and I can commit. With the rate I go through it (cooking fires once a year) 2 full loads for me should last a good 5-6 years, if not more. I still have some apple wood that will be 6 years in the stacks this April :whistle:
     
  9. buzz-saw

    buzz-saw

    Joined:
    Jan 31, 2020
    Messages:
    4,940
    Likes Received:
    29,035
    Location:
    Ct.
  10. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    I found a couple more heartwood splits for you. Hopefully I can grab that mill log too.
     
    T.Jeff Veal, eatonpcat and MikeInMa like this.
  11. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Delivery took me close by so I stopped. The access driveway had been plowed but still 8-10" of snow on the ground. Tub grinder awaits the dry ground. DSCF0612.JPG
     
  12. Skier76

    Skier76

    Joined:
    Dec 27, 2014
    Messages:
    3,077
    Likes Received:
    16,977
    Location:
    CT and SoVT
    Thanks for the update Brad! Just drove by this afternoon. Still some decent snow on the ground. I really need to get that 026 dialed in too.
     
  13. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Snow melted. Hoped they didn't bulldoze yet. They didn't. Ground had firmed up.

    Bad hair day for this hoarder with a good March wind blowing through the orchard. Lost my cap multiple times. Long afternoon cut yielded a heaping load. DSCF0658.JPG DSCF0657.JPG The potential mill log I left behind was still there from January. Scooped that up. DSCF0656.JPG With rain on Monday and the bulldozer in place I'm headed back tomorrow after I unload. DSCF0659.JPG
     
    Last edited: Mar 14, 2026
    MikeInMa, eatonpcat, JD Guy and 8 others like this.
  14. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,501
    Likes Received:
    67,368
    Location:
    Bristol, Connecticut
    Another nice heaping load. Good day for it minus the blustery conditions. More pleasant than 92 degrees and 85% humidity anyway. You aren’t wasting any time going right back tomorrow!
     
  15. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Yeah a bad hair day :hair:trumps a bad sweat day :dennis: any day!

    He did say bulldozing commencing once snow is gone. All my cuts have been way in back by that water tower. Still a row and a half back there. Todays cut was mostly small trees so a lot of cutting to fill the PU. Took my time (at least I thought I did) and a four hour visit. Biggest load of the six I've cut.
     
  16. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    34,592
    Likes Received:
    213,846
    Location:
    North Haven, Connecticut
    Might as well. More work but a decent premium when it sells. (I hope) And as weve said, how often do you get to cut any?

    You wont burn any as normal firewood?
     
  17. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    8,501
    Likes Received:
    67,368
    Location:
    Bristol, Connecticut
    I have in the past but that was when I had over a cord of it. I think in the winter of 21-22’ I burned an entire face cord. It made good firewood. For the amount of work involved though, I’d rather go after straight grained oak. It processes more easily and stacks a lot better.
     
  18. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    18,791
    Likes Received:
    120,873
    Location:
    Gettysburg, PA
    Agree with that for sure Eric. I don't miss the ugly looking stacks.
     
  19. T.Jeff Veal

    T.Jeff Veal

    Joined:
    Oct 8, 2015
    Messages:
    29,379
    Likes Received:
    187,924
    Location:
    Country life, Ga
    Glad you made it back to that score. That's a nice load of apple
     
  20. Skier76

    Skier76

    Joined:
    Dec 27, 2014
    Messages:
    3,077
    Likes Received:
    16,977
    Location:
    CT and SoVT
    Nice work Brad! Glad you were able to get more before they get the chipper/grinder going.