Husqvarna 3120xp....Help!

Pictures at long last.

 

Question for MDAVLEE or others, Would the 394 coil which is 2 bolt be better than the 3120xp 2 bolt coils ? I can get both off of the bay. Thanks

 

I tried the 394 coil and it would not work. I use the 272and retime the flywheel.

 

If I remember correctly you need the flywheel and coil. What rpm is stamped on the coil?

 

272 coils were in mine. Race and stock. Well I made a jonsered older coil work in the stock one. So it dont have to be 272 only. retime flywheel.

 

Pretty sure the last one I did I used a 272 coil and EPA fanwheel on the original keyway. Worked fine. I'll check the p/n on the fanwheel. Older fanwheel needs indexing

 

The newer -02 suffix flywheel should work with 272 coil with no indexing of wheel (stock keyway)

 

$450.00 + $30.00 shipping lower 48. I don'tknow how to retime this. I'll let someone that knows what they are doing figure this out. Item has loads of compression, Randy

 

send me a pic of it id be interested in it.

 

I tried the combo and it would not work. if I remember correctly the coil would not bolt up.

 

Send me some pictures too if terry passes on it.

 

Will do tomorrow, thanks, Randy

 

I'll get the pics out tomorrow, with Terry having first chance at it. Thanks.

 

MDAVLEE, I tried to PM & there is no send tab. I'll load the pictures here. Randy 1 414 464 5091 Terry didn't want it because he thought it was a runner. I bought it with a bad coil & never heard run.