2008 346xp 50cc $375 shipped to lower 48, USPS m.o. only I pulled the cylinder to install a new ring and remove carbon, upon inspection of piston I noticed the ring lock pin was loose. Was not worth the risk so I put a new Meteor piston and ring in it. There was no scratches, scoring, or transfer on cylinder wall. Base gasket is deleted, sealed with Honda bond. The exhaust port and combustion chamber has been polished. I also did a tasteful muffler mod with low restrictive screen in place and painted. Stars, runs, ideals, and oils. Comes with 18" .325 .05 cub cadet branded bar, like new. 2 husq branded chains 72dl 1 stihl rs square filed chain 73dl 1 extra 8 pin sprocket .325 (7 pin on saw) The bad: Previous owner ran without spark screen, burning the top cover. I sanded it and put heat tape under there to prevent more burning. Shouldn't burn cause of the larger deflector and screen slide is sealed better. Scratches, some fading, worn paint, chain rash behind sprocket, and dents in muffler. I have a sticker on order for the starter side. I have described this saw to the best of my knowledge, thanks for looking.
Nice saw. One is on my want list, just not right now...sigh. This should be a fast seller as they are not easy to find.
freaking BS = AS blanks out your link address. ************************************************?threads/346xp-ne.6229/#post-148246 SF send me number in PM to give him if you want. oe email to give him. Freaking communist crap site = AS.
I seen a alky/nitro 45cc 346 that was whooping most 3ci saws. Was built by Tom Fales Jr. Ran that saw too.
I have a masterminded 346 and it will out cut my mm441 in wood under 12" with the square chain that's in this add
My 45cc dozerdan saws out cut most others 50cc woods ported 346 saws. Only ones to out cut my 45cc was Andra andyshine built 50cc and dozerdan 50cc I was running. I had another known porter 50cc 346 here and my PP 45cc ate it up all day. Not even close.
There was fireworks there Saturday. I know you are a car guy, he has some custom one he built. The 54 Studebaker won Good Guys in Indy, amateur class
If it don't sell I'm not concerned. I cut tree tops left from logging and its perfect for that. Those little saws don't mess around. There hard to come by in my area........... Box store dealers.
Let me run some fuel through this 261 and get my Picco set up... We'll race.. I have the weekend of Halloween off (Fri, Sat, Sun). I know it's a holiday weekend, but I thought about posting a thread and asking if anyone wanted to attend either that Sat or Sun? For a small GTG.. Mainly B.S' ing, but we could run some saws through some Cants and I have 4-5 ash trees that need taken down.
