In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Anyone else out there Gone 40V Battery powered?

Discussion in 'Chainsaws and Power Equipment' started by Stephan, Jan 24, 2023.

  1. Eggshooterist

    Eggshooterist

    Joined:
    Dec 19, 2021
    Messages:
    6,581
    Likes Received:
    35,156
    Location:
    Erff
    If you paid attention, my response was to the fella who's quoted words were in my post. I'm not against battery anything. I bought a commercial grade Core outdoor power string trimmer long before any of these big name companies had them. That thing had the power of a 25cc gas. But like anything else battery, they degrade till you can't complete the task on one charge. I currently have a cheap gas trimmer but I'll go back to battery as they do what I need for the amount of trimming I do.

    I too have done plenty of testing and no home owner grade battery saw will out perform a decent homeowner gas saw. Period. Same for any level of saw currently. If it works for you great. I march to my own drummer on many things as well but trying to fill a truck with a battery saw will never be one. Ever. Yard maintenance or trimming branches encroaching into our trails, with a quality battery saw, definitely could be a possibility. Right tool for my tasks is how I roll. If a Ryobi saw is yours good on ya.
     
    Last edited: Jan 26, 2023
    Eckie, buZZsaw BRAD and Barcroftb like this.
  2. Eggshooterist

    Eggshooterist

    Joined:
    Dec 19, 2021
    Messages:
    6,581
    Likes Received:
    35,156
    Location:
    Erff
    I think you are on to something.
     
    Haftacut, Mrxlh, buZZsaw BRAD and 3 others like this.
  3. Scotty Overkill

    Scotty Overkill Administrator

    Joined:
    Oct 1, 2013
    Messages:
    9,604
    Likes Received:
    64,408
    Location:
    Central PA
    I own no battery saws (as of yet) but I do think Stephan brings a valid point to discussion here. For some people, it just makes sense. And thats OK. Being tree guy myself, I'll have a hard time ever relinquishing my Dino-burners. I like big power and expect it to get the job done promptly. There's just no battery alternative (power or weight) to the big saws.

    That being said, I know plenty of arborists have switched over to Huskys 540i tophandle battery saw with much admiration. August Hunicke did quite a few vids on YouTube with one, and was even helping Husky develop a remote tethered battery that clipped on your harness and was connected via an umbilical to the saw. Look some of those vids up. Impressive little setup! Made it much lighter and nicer to use in the canopy.

    And I've heard that Husky has the market cornered (thus far) at least in the tophandle battery saw world, the Stihls really aren't even a match for it (and I'm a Stihl guy).

    Welcome to FHC, Stephan!
     
  4. Eggshooterist

    Eggshooterist

    Joined:
    Dec 19, 2021
    Messages:
    6,581
    Likes Received:
    35,156
    Location:
    Erff
    A agree Scotty. To each their own. People will move to new technology as it is able to meet their needs. To many, it feels like its being crammed down their throats from electric cars down to ope. Most people already are changing from corded and air powered tools to strictly battery. I'm not far off from the full transition. not because I was forced to, because it makes sense currently. That technology is here in those type of tools and its excellent. And like I said before, I can definitely see the appeal to an arborist. I watch august vids and cottotops. They both seem to like that Husqvarna.
     
    Last edited: Jan 26, 2023
    Eckie, Haftacut and Scotty Overkill like this.
  5. RGrant

    RGrant

    Joined:
    Sep 2, 2019
    Messages:
    788
    Likes Received:
    4,384
    Location:
    Connecticut
    Slipped my mind for a while but I was thinking about it and a buddy of mine has a Greenworks model stove. I remember it having an 18 inch bar and we used it out in the "woods" of CT out here cutting up some pretty decent rounds. I think they were in the 30-32 inch diameter range. I recall the saw working well and he had a pretty cool case for it that held a couple of back up batteries. I couldn't tell you at this point if or how many times he exhausted a battery.
    Only recommendation I can give there is you get what you pay for with batteries. If you get a cheaper make, there isn't really much savings b/c they don't last. Learned that with my around the house tools.
    We all tend to be somewhat partial to what works for us, and in my mind (for whatever that's worth) I think that's the way we should be. I'd be kind of annoyed if someone gave me any amount of advice on what to do and turns out they don't do it themselves. When people ask what stove to get I say I have good experiences with my stove maker b/c I do. When people ask what saw I say I like the Stihls I have and the Husqvarna I used that worked well. Only battery saws I've used are my little 18v which I kind of anticipate lasting at least 10 years if it's like the other tools I've used.
    Can't think of what else to say that would be of any use to you but 18V Ryobi is what I use- again for really little stuff, and infrequently at that- and a buddy has the Greenworks 40V and he seemed to like it but haven't talked with him in a while.
    Looking more closely at what you initially wrote- 3 years with the saw is a pretty good track record to base your experience with. I'm not sure I'll be in a position to get a new saw in the near to medium future- but If you've got any other observations using the saw / oil consumption / durability of the build and batteries I'd be happy to read about them.
     
    Eckie likes this.
  6. Ron T

    Ron T

    Joined:
    Dec 12, 2018
    Messages:
    2,460
    Likes Received:
    17,898
    Location:
    Northeast Ohio....Bowdil
  7. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    6,780
    Likes Received:
    49,272
    Location:
    NC
  8. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,086
    Likes Received:
    17,929
    Location:
    The Mitten
    Quite frankly your post is needlessly confrontational and lacking anything substantially helpful to the discussion. Who precisely was “kicking and screaming” to defend gas chainsaws? All I saw was a few smart fellers pointing out that electric saws do not reasonably compete with gas saws for a number of personal reasons. That seemed to cause you enough hurt feelings to craft this overly dramatic hot take. 2A212DFA-9183-40B4-9238-4B28C5927C9F.gif
     
    Eckie, Biddleman, Ron T and 4 others like this.
  9. Warner

    Warner

    Joined:
    Jun 19, 2017
    Messages:
    7,221
    Likes Received:
    46,429
    Location:
    New Hampshire
    Your point is.
    I guess lithium comes from fairy farts.
     
  10. In the Pines

    In the Pines

    Joined:
    Sep 3, 2018
    Messages:
    1,434
    Likes Received:
    7,920
    Location:
    Ohio
    it's your tone and the attitude in your posts . Learn how to take care of a saw, learn how to tension a chain, sharpen a chain and the difference between good and bad gasoline.
    How to empty or stabilize the fuel.
    Adding the suck every drop out did not help you. China thanks you though for buying a china made saw and china made batteries.
    ps oil deposits refill, I know goes against all the propaganda you ever was taught. Lots of "experts" claimed the world would run out by the late 80's in the early 70's.
     
    Ron T, Haftacut, Erik B and 3 others like this.
  11. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    32,626
    Likes Received:
    199,417
    Location:
    North Haven, Connecticut
    Me too!!! :whistle:
     
    Haftacut and Jeffrey Svoboda like this.
  12. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    3,086
    Likes Received:
    17,929
    Location:
    The Mitten
    This is a great point. I think in the very near future lithium will be replaced with sodium. I’m all for electric as long as it is truly better and cleaner. At this point for many people it really isn’t.
     
  13. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    46,953
    Likes Received:
    295,723
    Location:
    Central MI
    Fellas, please don't let this thread go downhill any further.
     
    Stephiedoll, Eckie, wildwest and 11 others like this.
  14. yooperdave

    yooperdave

    Joined:
    Jun 16, 2014
    Messages:
    34,280
    Likes Received:
    212,303
    Location:
    Michigan's U.P.

    On the first point, about all I can say is wow! Must be hard to toe the line in her house! But here, I've got a fix for you and you're welcome!

    If "she" still orders you to undress outside, you're missing her point of something else! :rofl: :lol::rofl: :lol:

    [​IMG]


    I guess a truckload of wood is good for 2 batteries? Thanks, I've wondered just how much one can cut with those. :yes: I understand your comment about the advantage of being quiet when cutting firewood in national forest. No one else thought it was as funny as I did when I fired up a gas saw and revved the heck out of it while visiting sequoia national park. :cool: :whistle:

    And finally, I do not own a battery saw. I do not see myself having one either-my elec bills have been getting higher and higher for the last 2 years....:zip: A former neighbor had a corded elec saw that he would use from time to time but he didn't cut much firewood with it at all.

    How's about some pics? :handshake:
     
  15. Ron T

    Ron T

    Joined:
    Dec 12, 2018
    Messages:
    2,460
    Likes Received:
    17,898
    Location:
    Northeast Ohio....Bowdil
    Maybe we need a place for all things electric?? Just spitballing....
     
  16. Scotty Overkill

    Scotty Overkill Administrator

    Joined:
    Oct 1, 2013
    Messages:
    9,604
    Likes Received:
    64,408
    Location:
    Central PA
    As Dennis mentioned above, guys and gals, please keep the discussion civil. There are good talking points on both sides of this issue. Both sides of this issue have flaws, as well. There is no "one size fits all" cure for any of this. And there's no way on earth anyone will convince either side of the camp otherwise.
     
  17. Farmchuck

    Farmchuck

    Joined:
    Dec 18, 2016
    Messages:
    1,769
    Likes Received:
    8,650
    Location:
    Nepa
    Best answer.:)
     
  18. Skier76

    Skier76

    Joined:
    Dec 27, 2014
    Messages:
    2,805
    Likes Received:
    15,077
    Location:
    CT and SoVT
    We had a chainsaw carved bear made for us back in November/December. When we met the guy for pickup, I asked him what he used for saws. He said he was 80% battery for the carving. That allows him to do the work inside. Since he’s in Northern VT, that’s a big plus for at least half the year. He showed me one of the Stihl battery saws he used. He does some amazing work.
     
  19. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    6,780
    Likes Received:
    49,272
    Location:
    NC
  20. Lehman

    Lehman

    Joined:
    Dec 21, 2021
    Messages:
    616
    Likes Received:
    2,045
    Location:
    Minnesota
    Honestly the only battery saw that’s in the realm of gas is the new Stihl that’s equivalent to an ms 261 in high power mode but battery’s life’s fairly short in that power level. The saw has 3 settings, to buy an msa300 you’ll have about 1100 tied up saw battery a and charger.
     
    Eckie likes this.